Save time with this quick order form. If you know the catalog/part numbers for the items you wish to purchase, enter them into your cart here. You can also browse the site and add items to your cart from any product page.
CECO Door Louver & Window Kits Are Used For Use In The Home Or In The Office.
CECO Door Louver & Window Kits are made of steel, stainless steel or galvannealed steel for long lasting durability and strength. Door Louver Kits are designed for 1-3/4 in. doors. Louvers allow for flow of air and light, keeping rooms from being stuffy or dark. Available in fire rated and non-fire rated models. Window Kits are placed in doors to provide increased visibility and light. Glass is not included. Dimensions vary per model.
Louver & Steel Beveled Vision Lite VLFEZ2020B, 20" X 20", Bronze
VLFEZ - Beveled Vision Lite
Self-Attaching, Beveled Vision Lite with Single Side Fasteners for Fire Rated Doors for 3/16'' to 1/4'' Glass
Fire Rating: When installed in properly rated and approved door, ratings up to 3 hours can be achieved, depending on the glazing used. See glazing ratings for maximum exposed area. Tested and Listed for UL 10C and Criteria of UBC 7-2 Positive Pressure.
Fire-Rated Door Louver 1900A1212B, Adjustable Z-Blade, Self-Attach, 12" X 12", Bronze
Adjustable Z-Blade Louver with Fusible Link activated at 165 Degrees F is Ideal for Use in Fire Doors up to 1-1/2 Hour Rating. The Self-Attaching Frame Style is Ideal for Installation in Existing Door Cutouts.
Material: 16 gauge CRS frame and louver blades. Min size 10" x 6", Max 24" x 24".
Construction: Louver: Z-blade louver is riveted to the operating bar and frame at 1" intervals to welded 1-9/16" deep frame. Mechanical Stop holds blades open. Frame: Mitered and welded corners: screws fastened through prepared frame into louver core leaving corridor side of frame free of fasteners.
Operation: Adjustable blades of 16 gauge CRS pivot on cadmium-plated steel rivets. The blades are operated by a manual adjusting lever. A spring loaded fusible link mechanism is incorporated into the design; upon melting of the link, the action bar is actuated, thereby closing and locking all of the blades.
Steel Door Louver Two Piece 700A2424B, Inverted Split "Y", 50% Free Area, 24" X 24", Bronze
700A - Two Piece Louver With Inverted Split "Y" Blades
Two Rows of Inverted Split "Y" Blades Louver with Two-Piece Thru-Bolt Design for Wood or Metal Doors
Material: 18 gauge CRS frame and blades. Min size 6" x 4", Max 48" x 80". Multiple sections can be combined for larger sizes.
Construction: Louvers & Frame: 2 rows of inverted split "Y" blades at 1" intervals are attached by interlocking construction to the 3/4" deep welded frame. 1-1/4" trim, with mitered and welded corners and countersunk mounting holes. Non-vision Construction. Louver frame is screwed into door from 2 sides.