| |
24 Hour Time Switches, 1 Hour Minimum "On" Time |
 |
|
|
|
|
|
| Designed for industrial, commercial and residential applications. Highest HP ratings in the industry for loads up to 40 amps, providing direct 24 hr. control of most loads. Provides 1 to 12 "ON/OFF" operations each day with minimum ON/OFF times of 1 hour. All models equipped with one "ON" and one "OFF" tripper. Resistive Wattage is 40 Amp @120 - 480 VAC; Tungsten Wattage is 40 Amp 120 - 277 VAC. Click for more |
|
|
|
|
24 Hour Time Switches W / Skipper, Optional Carryover |
|
|
|
|
|
|
| T170CR Series " Same features as the T170 Series Skipper models plus a min. of 16 hours carryover for maintaining preset schedules during power failures. Carryover automatically rewinds when power resumes; only one hour of rewinding time required for every two hours of power outage. 4PST models are ideal for 3-phase load control. Click for more |
|
|
7-Day Time Switches With & Without Carryover |
|
|
|
|
|
|
| These time switches provide a different "ON/OFF" program each day of the week. They also provide for 4 pole single throw and 4 pole (2NO/2NC) switching. This series provides true 7-day load control with minimum ON and minimum OFF times of 3-1/2 hours. The "BC" models with carryover provide a carryover of 16 hours minimum to maintain accurate load control even during power failure. Click for more |
|
|
|
|
24 Hour Time Switches In Plastic Case, Swimming Pool Time Switches |
|
|
|
|
|
|
| Designed for industrial, commercial and residential applications. Highest HP ratings in the industry for loads up to 40 amps, providing direct 24 hr. control of most loads. Provides 1 to 12 "ON/OFF" operations each day with minimum ON/OFF times of 1 hour. All models equipped with one "ON" and one "OFF" tripper. Resistive Wattage is 40 Amp @120 - 480 VAC; Tungsten Wattage is 40 Amp 120 - 277 VAC. Click for more |
|
|
24 Hour Dial Time Switches W / Skipper |
|
|
|
|
|
|
| The T1900 Supervisor Series provides up to 96 operations (48 ON /48 OFF) every 24 hours. This series provides operations with minimum ON / OFF times of 15 minutes. Trippers slide in and out of dial for fast accurate setting. The skipper models provide for operations to be omitted on selected day(s) of the week. Click for more |
|
|
|
|
Short Range Cycle Timers |
|
|
|
|
|
|
Short Range Cycle Timers provide repeat cycling for "ON" times. Ten combination "ON/OFF" trippers supplied with each switch. Product features 1/2 HP, 125 VAC; 1 HP, 250 VAC motor.
Click for more |
|
|
GM40 Series 24-Hour / 7-Day Multi-Voltage General Purpose Time Switches |
|
|
|
|
|
|
| The GM40 Multi-Volt Series Time Controls are universal, electromechanical time switches which can be field configured for various power supply voltages. The voltage options include 120VAC, 208/240VAC, and 277VAC, all within the same unit Selection of the desired supply voltage is easily achieved by selecting the DIP to the corresponding input voltage. Click for more |
|
|
|
|
GMX Series 24-Hour / 7-Day General Purpose Time Switch |
|
|
|
|
|
|
The GMX Series Time Controls are universal, electromechanical time switches. They are a low cost alternative for applications that do not require more than 21A or 2HP @240VAC. The unit is mounted in a NEMA 1 Indoor or NEMA 3R Outdoor enclosure. Product features 2 HP @ 240 VAC motor.
Click for more |
|
|
In-Wall Timers |
|
|
|
|
|
|
| These in-wall timers are designed for automatic switching of loads. They have easy-to-set tabs with minimum ON/OFF times of 20 minutes and a manual override. They can be used to replace or in place of any standard toggle or decorator style switch. Model E1221 can be wired to control one or two receptacles. Resistive Wattage is 1875; Tungsten Wattage is 1350. Product features 1 @ 120V motor. Click for more |
|
|
|
|
MIL72 Series 24-Hour / 7-Day Electromechanical Time Controls |
|
|
|
|
|
|
The MIL72 Series time switches are designed to be mounted inside a control panel and can accommodate surface/DIN rail or flush/panel mounting.
Click for more |
|
|
Timing Control Centers, 7-Day Dial With Carryover |
|
|
|
|
|
|
Timing Control Centers, 7-Day Dial With Carryover, Are Ideal For Preset Timed Applications.
Timing Control Centers, 7-Day Dial With Carryover provide photo control initiated/time switch terminated control. Switches provide a different "ON/OFF" program each day of the week. Click for more |
|
|
|
|
Water Heater Time Switch |
|
|
|
|
|
|
| The WH40 provides a convenient external override switch. Utilities in many areas of the country offer two electric rates for residential or commercial customers. One rate has the regular daytime electrical rate, the other is "off peak" rate. The off peak rate provides customers with "lower-priced" electricity during the nighttime and weekend periods. Click for more |
|
|
Electromechanical Control Accessories |
|
|
|
|
|
|
Electromechanical Control Accessories Are Ideal For Maintenance And Repair Of Timed Lighting Applications.
Electromechanical Control Accessories allow easy repair and maintenance of various timed lighting applications. Trippers provide reversible ON and OFF operation for electromechanical timers. Click for more |
|
|
|
|
Outdoor Timers |
|
|
|
|
|
|
Outdoor Timers Are Ideal For Landscape Lighting, Holiday Decorations, Fountain Pumps And More.
Outdoor Timers conveniently allow lighting and other outdoor decor to automatically turn on and off at pre-programmed times. 7-Day Digital Outdoor Timers allow the timing on each day to be scheduled differently for maximum versatility. Click for more |
|
|
Momentary Contact Time Switches |
|
|
|
|
|
|
Momentary Contact Time Switches Are Ideal For Use With Mechanically-Held Contactors And Low Voltage Remote Controls.
Momentary Contact Time Switches are made of general purpose (NEMA 1) drawn steel with beige enamel for long lasting durability. Provides solid state circuit to drive two high-capacity dry contacts to either ON or OFF contactor coil terminals. Click for more |
|
|
|
|
T100M / 1100M Series 24-Hour Time Switch Mechanism |
|
|
|
|
|
|
| Designed for industrial, commercial and residential applications. Highest HP ratings in the industry for loads up to 40 amps, providing direct 24 hr. control of most loads. Provides 1 to 12 "ON/OFF" operations each day with minimum ON/OFF times of 1 hour. All models equipped with one "ON" and one "OFF" tripper. Resistive Wattage is 40 Amp @120 - 480 VAC; Tungsten Wattage is 40 Amp 120 - 277 VAC. Click for more |
|
|
24 Hour Time Switches W / Heater Circuit, Swimming Pool Time Switches |
|
|
|
|
|
|
| Designed for industrial, commercial and residential applications. Highest HP ratings in the industry for loads up to 40 amps, providing direct 24 hr. control of most loads. Provides 1 to 12 "ON/OFF" operations each day with minimum ON/OFF times of 1 hour. All models equipped with one "ON" and one "OFF" tripper. Resistive Wattage is 40 Amp @120 - 480 VAC; Tungsten Wattage is 40 Amp 120 - 277 VAC. Click for more |
|
|
|
|
T100 Series Pool/Spa Time Switches |
|
|
|
|
|
|
| Designed for industrial, commercial and residential applications. Highest HP ratings in the industry for loads up to 40 amps, providing direct 24 hr. control of most loads. Provides 1 to 12 "ON/OFF" operations each day with minimum ON/OFF times of 1 hour. All models equipped with one "ON" and one "OFF" tripper. Resistive Wattage is 40 Amp @120 - 480 VAC; Tungsten Wattage is 40 Amp 120 - 277 VAC. Click for more |
|
|
Plug-In Lamp and Appliance Timers |
|
|
|
|
|
|
Plug-In Lamp And Appliance Timers Allow Automatic On/Off Of Televisions, Radios, Lamps And More.
Plug-In Lamp And Appliance Timers provide a lived-in look for unoccupied homes and businesses for added security. Timers are made with a polarized plug and outlet with captive tabs every 15 minutes. Multiple ON/OFF options for any set time period.
Click for more |
|
|
|
|
Compact, 7-Day Time Switches |
|
|
|
|
|
|
The T2000 Series provides up to 84 (42 "ON/OFF") operations each week. Minimum "ON/OFF" times for this series are 2 hours each providing up to 6 "ON/OFF" operations each day. Resistive Wattage is 20 Amp @ 125, 208-277 & 480 VAC. Product features 1/2 HP 125 VAC; 1 HP 250 VAC motor.
Click for more |
|
|
