Save time with this quick order form. If you know the catalog/part numbers for the items you wish to purchase, enter them into your cart here. You can also browse the site and add items to your cart from any product page.
LDS Rubber Vibration Isolation Hangers Are Used For Providing High-Frequency Noise Isolation On A Variety Of Industrial Machines.
Hangers are double-deflection LDS (Low Dynamic Stiffness) rubber with a projecting bushing to prevent steel-to-steel contact. Upper and lower rods for easy attachment. Hangers are used for vibration isolation on smaller equipment running above 800 RPM. Hangers are available in a variety of sizes and colors.
Unhoused Simple Spring Mounts Are Used For Eliminating Structurally Transmitted Noise And Vibration.
Unhoused Simple Spring Mounts are constructed of an LDS (Low Dynamic Stiffness) rubber spring cup for lasting durability under pressure and a steel bottom cup for added strength. Steel springs reduce vibration transmission most efficiently as performance improves with larger deflections. Minimum deflection is 0.75" which increases with heavier loadings. Spring deflections are 2 - 6 times higher than the rubber products. Use for indoor applications on lightweight equipment that does not have to be completely level and does not need to be bolted down. Colors are Black, Blue, Purple, Red, Silver, White and Yellow. Height is 2-3/4". Diameter is 2". Maximum loads very per model.
Spring Vibration Isolation Hangers Are Used For Eliminated Structurally Transmitted Noise And Vibration.
Mounts are made with an LDS (Low Dynamic Stiffness) rubber spring cup for lasting durability under pressure. Spring cup features a projecting pushing to prevent steel-to-steel contact. Standard A, B and C springs are built for horizontal stiffness to prevent buckling or falling over. Available in a variety of sizes and colors.