| |
Climax Metal, 1C-Series : One-Piece Clamping Collar |
 |
|
|
|
|
|
| Design fully engages the shaft without marring. Greater axial holding power than set screw collars. Effective on hard and soft shafts. Bores Sizes from 1/8" to 4" in Stainless Steel, Aluminum and Black Oxide Steel. Click for more |
|
|
|
|
Climax Metal, NC-Series : Acetal Copolymer Shaft Collars |
|
|
|
|
|
|
| Will not rust or corrode. Ideal for wash down environments and USDA approved Collars include stainless steel screws. Bores Sizes 1/4" to 1". Click for more |
|
|
Climax Metal, C-Series : Standard Set Screw Collar |
|
|
|
|
|
|
| Traditional cost effective collar design. Bore Sizes 1/16" to 5-5/16" in Stainless Steel, Black Oxide Steel, Zinc Plated Steel and Unplated Steel. Click for more |
|
|
|
|
Climax Metal, Two-Piece Clamping Collar Double Width - D2C-Series |
|
|
|
|
|
|
| Double Wide Collar, High Axial Load Capacity. Ideal for Space Constrained Areas. Click for more |
|
|
Climax Metal, ESC-Series : End Stop Collar |
|
|
|
|
|
|
| Fits over rail assembly for precision shafting. Bore Sizes 1/2" to 1-1/2". Click for more |
|
|
|
|
Climax Metal, H1C-Series : One-Piece Recessed Screw Collar |
|
|
|
|
|
|
| Recessed screw head provides an outside surface free of major projections for safety. Design fully engages the shaft without marring. Greater axial holding power than set screw collars. Effective on hard and soft shafts. Bore Sizes from 1/8 to 4" in Stainless Steel, Aluminum and Black Oxide Steel.
Click for more |
|
|
Climax Metal, H2C-Series : Two-Piece Recessed Screw Clamping Collar |
|
|
|
|
|
|
| Recessed screw head provides an outside surface free of major projection for safety. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard and soft shafts. Bore SIzes 1/8" to 6" in Stainless Steel and Black Oxide Steel. Click for more |
|
|
|
|
Climax Metal, ISTC-Series : One-Piece Threaded Clamping Collar |
|
|
|
|
|
|
| Design fully engages the thread for secure locking. Bore Sizes 10-32 to 2-12 in Stainless Steel and Black Oxide Steel. Click for more |
|
|
Climax Metal, M1C-Series : Metric One-Piece Clamping Collar |
|
|
|
|
|
|
| Design fully engages the shaft without marring or other damage. Greater axial holding power than set screw collars. Effective on hard and soft shafts. Bore Sizes from 3mm to 80mm in Stainless Steel and Black Oxide Steel. Click for more |
|
|
|
|
Climax Metal, M2C-Series : Metric Two-Piece Clamping Collar |
|
|
|
|
|
|
| Design fully engages the shaft without marring or other damage. Two-piece collars are easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw collars. Effective on hard and soft shafts. Bore Sizes 3mm to 80mm in Stainless Steel and Black Oxide Steel. Click for more |
|
|
Climax Metal, MC-Series : Metric Set Screw Collars |
|
|
|
|
|
|
| Traditional cost effective collar design. Bore Sizes 2mm x 50mm to 50mm x 50mm in Stainless Steel and Black Oxide Steel. Click for more |
|
|
|
|
Climax Metal, Shaft Adapters |
|
|
|
|
|
|
Step Down Clamp-on Adaptor SDA-Series, Climax Metal, 3/4" bore, 1-3/4" outside diameter.
Step Down Adapters are ideal for making the shaft smaller. Clamping coupling portion will not mar the shaft. Adapters eliminate the need for complete shaft replacement.
Click for more |
|
|
Climax Metal, TC-Series : One-Piece Threaded Clamping Collar with Recessed Screw |
|
|
|
|
|
|
| Recessed screw head provides an outside surface free of major projections for safety. Bore Sizes 10-32 to 2-12 in Stainless Steel and Black Oxide Steel. Click for more |
|
|
|
|
Solid Set Screw Collars |
|
|
|
|
|
|
Set Screw Collar, 13/16" bore, 1 1/2 " outside diameter.
Unplated Steel Set Screw Collar. Traditional cost effective collar design.
Click for more |
|
|
One-Piece Clamping Collars |
|
|
|
|
|
|
One-Piece Clamping Collar, 4 " bore, 5 1/4 " outside diameter.
Black Oxide Steel One-Piece Clamping Collar. Design fully engages the shaft without marring. Greater axial holding power than set screw collars. Effective on hard & soft shafts.
Click for more |
|
|
|
|
One-Piece Safety Clamping Collars |
|
|
|
|
|
|
One-Piece Safety Clamping Collar, 7/8 " bore, 1 7/8 " outside diameter.
Stainless Steel One-Piece Clamping Collar - Recessed Screw Head. Recessed Screw Head provides an outside surface free of major projections for safety. Design fully engages the shaft without marring. Greater axial holding power than set screw collars. Effective on hard & soft shafts.
Click for more |
|
|
One-Piece Threaded Clamping Collars |
|
|
|
|
|
|
One-Piece Threaded Clamping Collar, 1 1/8-07" bore, 1 7/8 " outside diameter.
Black Oxide Plated Steel One-Piece Threaded Clamping Collars. Design fully engages the thread for secure locking.
Click for more |
|
|
|
|
Two-Piece Clamping Collars |
|
|
|
|
|
|
Two-Piece Clamping Collar, 2 5/16" bore, 3 1/2 " outside diameter.
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Click for more |
|
|
Two-Piece Safety Clamping Collars |
|
|
|
|
|
|
Two-Piece Safety Clamping Collar, 2 3/8 " bore, 3 1/2 " outside diameter.
Stainless Steel Two-Piece Clamping Collar - Recessed Screw Head. Recessed Screw Head provides an outside surface free of major projections for safety. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Click for more |
|
|
|
|
Metric Solid Set Screw Collars |
|
|
|
|
|
|
Metric Set Screw Collar, 18 mm bore, 32 mm outside diameter.
Black Oxide Plated Steel Metric Set Screw Collar. Traditional cost effective collar design.
Click for more |
|
|
Metric One-Piece Clamping Collars |
|
|
|
|
|
|
Metric One-Piece Clamping Collar, 8 mm bore, 18 mm outside diameter.
Black Oxide Steel Metric One-Piece Clamping Collar. Design fully engages the shaft without marring. Greater axial holding power than set screw collars. Effective on hard & soft shafts.
Click for more |
|
|
|
|
Metric Two-Piece Clamping Collars |
|
|
|
|
|
|
Metric Two-Piece Clamping Collar, 13 mm bore, 30 mm outside diameter.
Black Oxide Plated Steel Metric Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
Click for more |
|
|
Climax Metal, 2C-Series : Two-Piece Clamping Collar |
|
|
|
|
|
|
| Design fully engages the shaft without marring Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard and soft shafts. Bore Sizes 1/8" to 6" in Stainless Steel, Aluminum and Black Oxide Steel. Click for more |
|
|
|
|
|
|
