 |
Browse Warning Tapes
(493 Items) |
 |
 |
Sub Category |
 |
| Tapes-Glow (50) |
|
|
|
|
|
| Narrow Your Results By: |
|
|
 |
|
 |
More Choices In Warning Tapes |
|
|
|
| Showing 50 items within 8 product groups |
| |
Glow Anti-Slip Tapes |
|
|
|
|
|
|
Use Glow Anti-Slip Tapes To Mark Aisles, Walkways, and Emergency Equipment.
Glow Tapes are designed to adhere to any flat, horizontal or vertical surface. Uses pressure sensitive adhesive to stick to any face. Signs do not require mechanical or electrical power source. Tapes absorb and store energy from ambient light; immediately visible in sudden black out conditions. Click for more |
|
|
|
|
Glob Brite Flexible Tapes |
|
|
|
|
|
|
Glow Tapes Mark Aisles, Walkways, And Emergency Equipment For Visibility During a Blackout.
Glow Tapes are designed to adhere to any flat, horizontal or vertical surface. Uses pressure sensitive adhesive to stick to any face material. Exceeds minimum compliance requirements for brightness, toxicity, radioactivity and flame spread. Click for more |
|
|
Photoluminescent Plastic Stair Nosing |
|
|
|
|
|
|
PVC Stair Nosing Is Glow-In-The-Dark For High Visibility, Even At Night.
Step guards are made using yellow photoluminescent co-extruded into the front edge of the PVC, offering 55/8 luminance. Won't chip or peel. Sold in 14'11" rolls. Can be cut to size using a utility knife. Stair nosing can be anchored to floors and steps using a high-strength epoxy adhesive (not included). 2. Click for more |
|
|
|
|
Glo-Brite Rigid Tapes |
|
|
|
|
|
|
Glo Brite® Rigid Tapes Are Used Along Exit Routes And Leading Edge Of Landings.
Glow Tapes are designed to adhere to any flat, horizontal or vertical surface. Uses pressure sensitive adhesive to stick to any face material. MEA approved and compliant with the requirements of New York City Law #26. Click for more |
|
|
Glo-Brite Squares For Door Handle Markings |
|
|
|
|
|
|
Glo Brite® Signs Store Ambient Light That is Immediately Available When The Area Goes Dark.
Direct personnel to safety when the lights go out! Glow signs are non-electric, non-toxic and non-radioactive. Signs are essential for establishing low-light emergency evacuation routes. Signs do not require mechanical or electrical power source. Click for more |
|
|
|
|
Glo-Brite Anti-Slip Rigid Tapes & Step Markers |
|
|
|
|
|
|
Glo Brite® Strips and Step Markers Illuminate Evacuation Routes.
Use these glow tapes along exit routes and leading edge of landings. Tapes do not require mechanical or electrical power source. These tapes absorb and store energy from ambient light, to be immediately visible in sudden black out conditions. Click for more |
|
|
Durastripe Glow Floor Marking Tape |
|
|
|
|
|
|
Durastripe Glow Floor Marking Tape With A Glow-In-The-Dark Stripe Adds Safety During Factory Power Outages.
Durastripe Glow Floor Marking Tapes provide a long lasting, durable way to mark exit paths for up to 60 minutes after the lights go out. Applies instantly without the mess, dry time, and fumes of paint. Tape is 4" wide on 50' rolls. Click for more |
|
|
|
|
Permalight® Photoluminescent Tape |
|
|
|
|
|
|
Permalight Photoluminescent Tape Is Ideal For Marking Steps For Commercial And Industrial Buildings.
Photoluminescent Tape provide step markers on left and right of steps in a staircase to highlight escape route. Markers absorb and store energy from ambient light to provide immediate visibility in a sudden black-out or underneath smoke. Foamy adhesive backing keeps tape in place. Click for more |
|
|
|
|
