Nylon Base Leveling Mounts Are Designed For Flexible Use On Uneven Surfaces And To Support From 4000 To 7500 Lb. Load Capacities.
Nylon Base Leveling Mounts are made for long lasting durability and dependability. Sturdy glass filled nylon plastic base with solid zinc plated steel threaded stud and hex nut. Threaded stud has ball joint end designed to swivel 15° in all directions for added flexibility of use and installation. It is not recommended to move the stud beyond the 15° mark, otherwise the ball end of the stud can pop out of its seat and both stud and pad will separate. Coupling nut is not recommended to use for installation. Use nut or tapped hole of 1 to 1-1/2 times the thread diameter being used. Available in 4000, 5000 and 7500 lb. load capacity units. To insure proper leveling mount size, divide the machine weight by the number of mounts required. This will equal the pounds or load per mount. Choose mounts With or Without Lag Bolt Holes on base. Wide selection of 1.97, 3.15 and 4.33 inch base diameter, 3, 4, 6, 8 and 10 inch stud length mounts are available with 3/8-16, 1/2-13, 5/8-11, 3/4-10 and 1-8 inch thread sizes. Various size studless mounts with hex nut attached directly to ball joint also available.