HD Commercial And Light Industrial Air Purifier - 2100 CFM 120V - Black
Promote a healthy environment by reducing the contaminants in the air with this heavy duty air purifier. This unit features two speeds for cleaning capabilities of 1500-2100 cubic feet per minute and is ideal for multiple commercial and light industrial applications. The CFM of all our units were tested with the filters in place for a true reading. This unit will cover 900 sq. ft. with an 10' ceiling for 14 air changes per hour. Square footage can be increased when less air changes per hour are required. For best results, run the unit around-the-clock for constant air movement and filtering. It is important to always have the correct number of units properly placed corresponding to the air changes required per hour to achieve proper air quality. The motor operates at a decibel rate slightly above or lower than the average conversation! Due to the high rate of CFM for this unit, dual filter cell technology is incorporated into the design for increased cleaning collection area for maximum cleaning efficiency. These filters do not require any special alignment when installed in the unit, no second guessing as to if the filters were installed correctly for proper operation. The air is first filtered through a washable pre-filter, then through two permanent and washable Electronic Filters and a disposable odor absorbing Carbon After Filter. When cleaning the Electronic Filters, use a cell cleaning solution for best results. No Media filters to throw away, helping to eliminate the size of our landfills. The Electronic Filter has an efficiency rating up to 97% of particulate as small as 0.01 microns which includes allergy triggers such as pollens, animal dander, cigarette and cooking smoke, dust, fly ash, bacteria and many viruses. This unit is supplied with a 7' long three prong cord which plugs into a standard 115 Volt outlet and is mounted either from a ceiling using chain (or comparable material) with the eyebolts supplied or can be mounted to a wall using the wall mount kit. A maintenance background is required for proper installation. No assembly is required. Always read the manual before installation and operating for best results. Unit is manufactured in the U.S.A. Black finish. 21-1/2"Wx21"Dx19"H overall.