Configurable Ladders & Platforms

U-Design 8 step Unsupported Cantilever ladder with 20" of cantilever platform length with grip strut tread. The cantilevered platform is counterweighted allowing the cantilever platform to extend into the work area with no obstructions on the bottom of the ladder. The ladder is designed with a comfortable 50 degree stairway incline with 24" wide perforated steps. The ladder can be configured as a Supported Cantilever ladder by removing the counterweight and adding the 20" U-Design Extension Bottom Kit. Powder coated yellow finish. Cal-OSHA Compliant.

U-Design Crossover 5 step Turn Platform. For L-shaped configurations 1 turn platform is required and for U-shaped and Z-shaped configurations 2 turn platforms are required. Turn Platform is 24" wide with perforated tread and includes toe board and guardrail. Used with all grip strut spans and ladders. Powder coated Yellow finish Click the Specifications button below to access the U-Design Configurator which provides a simple step-by-step selection process to configure your ladder. Must be purchased with ladder units, leg kits and/or crossover bridges as required.

U-Design Crossover 7 step ladder on a 50 degree stairway incline with 24" wide perforated steps. Can be used on either side of the Crossover and be paired with any other 7 step ladder regardless of the incline. Powder coated yellow finish. Click the Specifications button below to access the U-Design Configurator which provides a simple step-by-step selection process to configure your ladder. Must be purchased with leg kits, crossover bridges, and/or turn platforms as required.

Multi-Platform Access System 90"L x 30"W platform unit with serrated tread. Each platform unit requires platform support legs on each end (2). Platform unit fasterns to stairway ladders, platform guardrails and platform support legs. Aluminum mill finish, the platform unit capacity is 500# and complies with all applicable OSHA and ANSI standards. The Multi-Platform Access System allow you to design your own platform and ladder configuration to suie any application where work is being done at height. The platform components can be used together for more width or lenght. You can create a ...

U-Design Crossover 5 step ladder on a 75 degree stairway incline with 24" wide grip strut steps. Can be used on either side of the Crossover and be paired with any other 5 step ladder regardless of the incline. Powder coated yellow finish. Click the Specifications button below to access the U-Design Configurator which provides a simple step-by-step selection process to configure your ladder. Must be purchased with leg kits, crossover bridges, and/or turn platforms as required.