Surface mounted vandal resistant hand dryer is fabricated with one-piece 1/4" thick cast iron cover, with glazed porcelain coated. Back base is aluminum, 1/8" thick with 4 holes for wall mounting. Cover is equipped with a chromed-plated revolving 360° nozzle for hand and face drying. Dryer is activated through an infrared electronic sensor and automatically turns off when hands are removed. Motor is 1/3 hp, 5,500 r.p.m., universal type, with a 4A fuse with sealed, self- lubricated ball bearing. Waved wire NiCr heating element should incorporate a thermal limiter which will switch off by a temperature of 176 °F (80°C). Fan is an aluminum centrifugal turbine with double symmetrical inlet, and the fan scroll is made of a fire resistant plastic UL 94-V0. Dryer shall deliver 290 CFM of air at 128 °F (53 °C) and 5,512 LFM velocity during user controlled drying cycle. Dryer has a total power of 1,850 W with a consumption 16A. Noise level is 70 dB. Overall dimensions: 11-1/8"W x 10"H x 8-1/2"D. Unit is UL listed, and/or VDE approved and CE marked.