Previous

Item in product family

Next

Item in product family

Call us 7 days a week

1.888.978.7759

Know exactly what you want?

Save time with this quick order form. If you know the catalog/part numbers for the items you wish to purchase, enter them into your cart here. You can also browse the site and add items to your cart from any product page.

Quick Order

Item NumberQuantity
Return to Category List
Morse® Hand Drum Pump Model 26 for Petroleum or Lube Oils up to 2000 SSU Viscosity
See all 41 items in product family

Morse® Hand Drum Pump Model 26 for Petroleum or Lube Oils up to 2000 SSU Viscosity

Item #: WBB806429

Sold By: globalindustrial.com

Usually ships in 5 to 8 days Estimated lead times do not include weekends or holidays. Transit time is determined by shipping method and destination. Orders requiring credit information might take additional time.

0 reviews | Write a review

Price: $ 233.95
Product Information
Product Q&A
Accessories
Morse® Hand Drum Pump

General Guide: Petroleum Products or Lube Oils up to 2000 SSU Viscosity

Morse manual drum and barrel pumps provide a controlled discharge rate of approximately 1 quart (.95 liter) on complete forward and backward cycle at 10 psi over 24 feet (7.3 m). They fit the NPT (National Pipe Thread) of the 2" (5 cm) bung on 55 or 30 gallon (208 or 114 liter) steel drum. Adaptors are also available to use Morse 55-gallon (208 liter) barrel pumps with the buttress thread of the 2" (5 cm) bung on your plastic barrels.
  • Suction lift tested for 15 feet (4.6 m) minimum
  • Discharge head up to 25 feet (7.3 m)
  • Output head pressure is up to 10.83 psi
  • 1" (2.54 cm) NPT suction tube
  • 3/4" (1.9 cm) NPT discharge tube
  • Two position drum pump handle
    • Handle can be mounted above the drum hand pump extending 20.5" (52 cm) above the bung when upright.
    • Mount handle below the drum hand pump for easier operation from below with the drum on a truck or platform.
  • Self-lubricating Polytetrafluoroethylene piston ring operates wet or dry for long life
  • Chemically compatible with liquids up to 120° F (49° C)
  • Handles viscosity up to 2,000 SSU (about as thick as 30 weight motor oil at room temperature). Handle effort increases as viscosity approaches this maximum.
  • This Morse Model 26 drum / barrel pump is generally useful with compatible liquids in a mild acidity/alkalinity range of pH 4 to 9. Avoid stronger acids and caustics.

Product Specifications

    • BRANDMorse
    • COMPATIBLE LIQUIDSPetroleum Products, Lube Oils
    • CONSTRUCTIONPolyester
    • DISCHARGE SPOUT DIAMETER INCHES3/4" PVC
    • DISPENSING RATE1 Qt. per Stroke
    • GASKET MATERIALCork-Nitrile
    • MANUFACTURERS PART NUMBER26
    • SEAL CONSTRUCTIONViton
    • SUCTION TUBE DIMENSION INCHES1 Polyester
    • TEMPERATURE RANGE °F120
    • THREAD INCHES2 NPT
    • TYPEDrum Hand Pump
    • WEIGHT LBS10

There are 0 questions and 1 answers for this product.

Sort by: 
...  

0 Result

Would this pump be good for pumping ep 460 oil, and at what rate?

Question Asked By: anonymous

+ View 1 Answer

Answer This Question

Sort by: 
...  

0 Result