Baldor Motor CECP84115T-5, 50HP, 1775RPM, 3PH, 60HZ, 326TC, TEFC, FOOT


Write a review for this product.

Baldor Motor, 50HP,1775RPM,3PH,60HZ,326TC,TEFC,FOOT,

Features:

Designed and manufactured and tested to exceed the IEEE 841-1994 standards for severe duty TEFC induction motors
Premium efficiency copper windings using Baldor ISR (Inverter Spike Resistant)® magnet wire comply with CEE efficiency guidelines
Inpro Seal® on fan and drive end shaft extensions
2-part yellow epoxy oxide primer (inside & outside)
Gray epoxy paint and corrosion resistant hardware
Reduced noise, vibration and mechanical tolerances
Final test and vibration results shipped with motor

Typical Applications:
Typical applications include petro-chemical, pulp and paper plants, mines and other installations requiring premium efficient motors manufactured and tested to rigid standards for severe duty service.

Click here to see our full selection of Motor Controls and Drives.

Click for Motor Specs and Diagrams

Product Specifications

HORSEPOWER	50
ENCLOSURE	TEFC
FRAME	326TC
BRAND	Baldor
MOUNTING	Foot Mounted
RPM	1775
PHASE	3
VOLTAGE	575
HERTZ	60
SERVICE FACTOR	1.15
AMBIENT TEMP C	40
OPPOSITE END BEARING	6312
WEIGHT	725
POLES	4
# OF ROTOR BARS	40
CUSTOMER-PART-NUMBER	--
EFFICIENCY-2	93.6
GREASE	POLYREX EM
MAX. KVAR	9.4
MOTOR-WEIGHT	633
# OF STATOR SLOTS	48
MAX. SPACE HEATER TEMP.	--
SPACE-HEATER-AMPS	--
SPACE-HEATER-VOLTS	--
FL AMPS	45.6
DOE-CODE	--
DESIGN CODE	B
BEARING-DRIVE-END	6312
BALDOR CATALOG NUMBER	CECP84115T-5
TEMP. CODE	T3
SPEC. NUMBER	12E920X283
SERIAL-NUMBER	--
POWER-FACTOR	87
KVA-CODE	H
INSULATION-CLASS	F
FL EFFICIENCY	94.5
DRIVE END FLANGE	C-Face
C-DIMENSION INCHES	30.44