Made in Germany, Reversible jaws can be used for both external and internal applications, Combination puller can be used as a 2-jaw or 3-jaw puller depending on your application. The 3-arm lug puller with combi traverse has oscillating and reversible puller legs and is used for centric pulling off of bearings, gears and washers in all common sizes for handicraft, workshop and industry. It can be used to loosen any component that sits on a shaft and is freely accessible from the outside. The swivelling puller legs with adjustable clamping width can be used on both sides. The claw shape ...

Made in Germany, Combination puller can be used as a 2-jaw or 3-jaw puller depending on your application, Adjusted reach to provide larger depth range. The heavy, 3-armed lug puller with oscillating, height-adjustable puller legs and combi traverse is used for centric pulling off of large bearings, gears and discs in all common sizes for handicraft, workshop and industry. It can be used to loosen any component that sits on a shaft and is freely accessible from the outside. The oscillating puller legs adapt to any installation situation and can be used universally thanks to the adjustable ...

Extracts steering assembly pitman arms. Extracts pulleys with one or two grooves from alternators and starters.

Made in Germany, Puller hooks are specially hardened and smoothed, Side clamp increases pressure on the hooks significantly to reduce kicking/slipping. The 2-arm "Cobra" bearing puller with side clamp is used to pull off particularly tight ball bearings, bearing rings and workpieces. It can be used to loosen any component that sits on a shaft and is freely accessible from the outside. Thanks to the clamp, the contact pressure of the puller legs is increased many times over. When the clamp is tightened, the sharp claws of the puller legs grip under the part to be pulled off and loosen it ...

Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.