Bryant 560B9W Inlet, 4 Pole, 5 Wire, 60A, 3ph Y 120/208V AC, Blue


Write a review for this product.

Construction:

Technical Specs:

Dielectirc Voltage: 3,000 Volts- Receptacle and Inlet
Maximum Working Voltage: 600V AC
Spacings: 1/4" Minimum creepage and clearance per UL 1682
Current Interrupting: Certified for current interrupting at full rated current where applicable per UL 1682
Temperature rise: Less than 30 deg C temperature rise at full rated current after 50 cycles of overload tested at 150% of rated current a 75 PF
Endurance: Up to 5,000 connect and disconnect cycles at full rated current and voltage per UL 1682
Mechanical Crush Test: 250 lbs Force for 1 minute after 6 hours at -25 deg C
Moisture Resistance: Submerged 24 hours at 2" below water surface
Flammability: V2 minimum per UL 94
Operating Temperature: Maximum Continuous 95 deg C with impact, minimum continuous -40 deg C without impact
Moisture Protection: IP67
Polarization Integrity: Mating devices will not energize ground if polarization feature is removed and 40 lbs Force is applied

Standards:

Terminal Identification: Terminals identified in accordance with North American Codes
UL Listing: Meets UL 1682 and 1686 requirements
CSA Listing: CSA certified C222 No 182-1 - 1988
IEC: Complies with IEC 309-1 and 309-2 International Standards for singly-rated non-interchangeable configurations
Conform To: Conforms to UL 1686 (pin & sleeve configurations)

Product Specifications