Insul-Lock® Self Seal 6'L, 1" Wall Thickness, 2-3/8" Nom. I.D


Write a review for this product.

Insul-Lock® Self Seal 6'L, 1" Wall Thickness, 2-3/8" Nom. I.D

This superior closed cell insulation is designed to retard heat flow and prevent condensation when properly installed. INSUL-LOCK® Seam-Seal pipe insulation is pre-slit with a factory applied specially formulated bonding adhesive applied to both seam surfaces and comes with convenient built-in release liners which allow for easy installation. Ideal for applications such as refrigerant lines, cold water plumbing, roof drains and chilled water systems. INSUL-LOCK® Seam-Seal pipe insulation is made from a UV resistant elastomeric blend. For moderate UV exposure, no additional protective coating needed. However, for severe UV exposure (rooftop applications) or where optimum performance is required, 374 Protective Coating or approved jacketing or cladding should be used.

SPECIFICATION COMPLIANCEASTM C 534 Type 1 (Tubing), Grade 1 ASTM D 1056-00-2C1 New York City MEA 186-86-M Vol. IV USDA Requirements. UL 94-5V Flammability Classification (Recognition No. E300774) ASTM E 84 1-1/2" 25/50-tested according to UL 723 and NFPA 255 Complies with requirements of CAN/ULC S102-03. FMRC Approval Guide Chapter 14 Pipe Insulation. Meets requirements of NFPA 90A Sect. 2.3.3 for Supplementary Materials for Air Distribution Systems. Meets requirements of ASTM C 411 (Test Method for Hot Surface Performance of High Temperature Thermal Insulation). Meets requirements of UL 181 sections 11.0 and 16.0 (Mold Growth/Air Erosion).
Sold in package quantity of 6, priced each.

Product Specifications

LENGTH FEET	6
CHEMICAL/ SOLVENT RESISTANCE	Good
MILDEW RESISTANCE/ AIR EROSION	Pass
NOMINAL INSIDE DIAMETER INCHES	2-3/8
OPERATING TEMPERATURE RANGE	-70°F - 200°F
OZONE RESISTANCE	Pass
SMOKE DEVELOPED UP TO 1/2" THICKNESS	Not Greater Than 50
WALL THICKNESS INCHES	1
WATER ABSORPTION %	<0.20 by Volume
WATER VAPOR PERMEABILITY DRY CUP	<0.06
PACKAGE QUANTITY	6
BRAND	K-Flex USA
TYPE	With Core
FLAME SPREAD UP TO 1/2" THICKNESS	Not Greater Than 25
THERMAL CONDUCTIVITY 90°F MEAN	.27 BTU-in/hr-ft²-°F
DENSITY	3-6 PCF
COLOR FINISH	Black
DESCRIPTION	Tubular Insulation
MANUFACTURERS PART NUMBER	6RXL100238
THERMAL CONDUCTIVITY 75°F MEAN	.25 BTU-in/hr-ft²-°F

Buy Folding Gates, Fire Extinguishers, Crowd Control Barriers, First Aid Supplies, Signs and More at Global Industrial and Save Money Today!

Safety & PPE

Pipe & Tubing