Ring Kits

16mm Inverted External Snap Ring - Standard Duty - Stamped - Carbon Spring Steel - Phosphate - USA Popular series of retaining rings, incorporating a tapered design in axial installations. Model is sold in Packs of 100, the minimum order is 8 packs, for a total of 800 pieces

1-3/16" External Snap Ring - Standard Duty - Stamped - 15-7 / 17-7 Stainless Steel Popular series of retaining rings, incorporating a tapered design in axial installations. Model is sold in Packs of 10, the minimum order is 7 packs, for a total of 70 pieces

Includes: Narrow Hydraulic Coupler 1/8-27NPT CS ZC (3) Fitting 1/8-27PTF CS Z3 (25) Fitting 1/4-28SAE-LT 45D CS Z3 (10) Fitting 1/8-27PTF 90D CS Z3 (10) Drive Fitting 1/4 CS Z3 (10) Fitting 1/8-27PTF CS Z3 (6) Fitting 1/8-27NPTF CS Z3 (6) Drive Fitting 5/16 CS Z3 (6) Fitting 1/4-18PTF CS Z3 (6) Fitting 1/8-27PTF 45D CS Z3 (10) Fitting 5/16-32UNEF CS Z3 (6) Fitting 1/8-27PTF 65D CS Z3 (5) Fitting 1/8-27PTF 30D CS Z3 (5) Drive Fitting 3/16 CS Z3 (15) Fitting 1/4-28SAE-LT CS Z3 (6) Fitting 1/4-18 PTF 65D CS Z3 (6) Fitting 1/4-28SAE-LT 90D CS Z3 (10) Fitting 1/4-28SAE-LT CS Z3 (25)

A semi-circular stamping with two ends which are set further apart than both internal and external rings. The two ends have flared "prongs" which are substantially wider than the other parts of the ring. A center prong extends from the inside perimeter of the ring, halfway between the two ends. The three prongs, when radically installed, make contact with the bottom of the groove.

3/8" Reinforced External Push-On Ring - .015 Thick - Stamped - Carbon Spring Steel - Phosphate - USA These are excellent groove less retainers used primarily in lighter-duty applications. Model is sold in Packs of 250, the minimum order is 13 packs, for a total of 3250 pieces