Call us 7 days a week


Know exactly what you want?

Save time with this quick order form. If you know the catalog/part numbers for the items you wish to purchase, enter them into your cart here. You can also browse the site and add items to your cart from any product page.

Quick Order

Item NumberQuantity
Return to Category List

Browse Welding

(6,930 items)

Narrow Your Results


  • Less...
  • More...


  • Less...
  • More...


  • Less...
  • More...



  • Less...
  • More...



Recently Viewed


  • Electrodes

    See all 49 items in product family
    2% Thoriated Tungsten: The most common electrode used today. They contain a nominal 2 wt-% of Thorium Oxide (ThO2) throughout the entire length of the rod. Provides a stable ARC and is easy to start. Used generally on DC negative or straight polarity.

    2% Ceriated Tungsten: An excellent substitute for 2% thoriated tungsten and is designed for transformer and inverter based power sources. For Transformer DC welding, this tungsten requires less amperage to start so it is recommended for thinner metals. It offers a stable arc and can be used for both AC and DC welding with inverter power sources.

    Pure Tungsten: Contain a minimum of 99.5% wt-% Tungsten. These electrodes are known to be the most economical and are considered good for general purpose welding on Aluminum and Magnesium. The tip will form a clean, balled end that provides good ARC stability on AC.

    Type 6011 Mild Steel: All position electrode. Use when you are unable to prepare a welding surface. Its deep penetration allows welds through rust, scale, oil and dirt. For expert welders.

    Type 6013 Mild Steel: All position electrode. Best used with clean or prepared welding surface. Excellent for low heat applications designed for general purpose. For novice welders.

    Type 7014 Iron Powder: All position electrode. Best used with clean or prepared welding surface with medium to low penetration. Designed for high deposition and high electrode travel speed.

    Type 7018 Low Hydrogen: All position electrode. Best used with clean or prepared welding surface with Medium penetration. Designed to produce X-ray quality welds. For skilled welders.

    E6024 Quick Start Mild Steel: Best used with clean or prepared welding surface and excellent for low heat applications. Flat & horizontal fillet only.

    Type 308 Stainless Steel: Provides equal or better corrosion resistance than the base metal. Can be used for fabricating and repairing austentic manganese steel.

    E4043 Aluminum Arc: Best used for weld with strength ductility and corrosion resistance equal to parent metal. Applications include aluminum, sheet metal, plates, castings, tanks and piping.

    Click for more
  • Welding & Brazing Rods

    Welding & Brazing Rods
    See all 9 items in product family
    Brazing rods are constructed from bronze or aluminum, and are used to join steel workpieces. Welding rods are constructed of manganese bronze or mild steel, and are commonly used in gas welding applications. Available in flux or copper coatings. Products are manufactured in the USA. Package quantities vary by model.

    Click for more
  • Welding Wire - Steel & Aluminum

    Welding Wire - Steel & Aluminum
    See all 46 items in product family
    The proper choice of steel or aluminum filler metal mainly depends on the base metal properties to be achieved and Welding technique. Post weld cracking, corrosion resistance and behavior under elevated temperature also need to be taken into consideration. Cracking usually can be minimized by choosing a filler metal alloy of higher alloy content then the base metal.

    Click for more
  • Welding Wire - Flux Core

    Welding Wire - Flux Core
    See all 6 items in product family
    E71T-GS is a self-shielding all position flux cored welding wire for single pass applications. The use of DC straight polarity minimizes the risk of burn through. It is excellent on lap and fillet welds on thin mild steels.

    Click for more
  • Electrode Holders

    Electrode Holders
    See all 14 items in product family
    Electrode Holders Allow Safe Tool Handling For Welding, Repair, and Maintenance Applications.

    These electrode holders and parts give you handling stability and strength for heavy duty welding jobs. Available with electrode holding capacities ranging from 5/32" to 3/8".

    Click for more