Collars

Climax Metal Set Screw Collars And Reducer Bushings Are Available For Various Spacing or Coupling Applications.Climax Metal Set Screw Collar And Reducer Bushings are solidly made for long las...

Design fully engages the shaft without marring. Greater axial holding power than set screw collars. Effective on hard and soft shafts. Bores Sizes from 1/8" to 4" in Stainless Steel, Aluminum and Black Oxide Steel....

Climax Metal, 2C-Series: 2-Piece Clamping Collar Supports Shaft for Motors and Other Equipment. The collar design fully engages the shaft without marring Easily installed where major disassem...

Will not rust or corrode. Used for wash down environments and USDA approved Collars include stainless steel screws. Bores Sizes 1/4" to 1"....

Traditional cost effective collar design. Bore Sizes 1/16" to 5-5/16" in Stainless Steel, Black Oxide Steel, Zinc Plated Steel and Unplated Steel. Climax Metal, c-series: standard ...

Double Wide Collar, High Axial Load Capacity. Used for Space Constrained Areas....

Fits over rail assembly for precision shafting. Bore Sizes 1/2" to 1-1/2"....

Recessed screw head provides an outside surface free of major projections for safety. Design fully engages the shaft without marring. Greater axial holding power than set screw collars. Effective on hard and soft shafts. Bore Size...

Recessed screw head provides an outside surface free of major projection for safety. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power...

Design fully engages the thread for secure locking. Bore Sizes 10-32 to 2"-12 in Stainless Steel and Black Oxide Steel....

Design fully engages the shaft without marring or other damage. Greater axial holding power than set screw collars. Effective on hard and soft shafts. Bore Sizes from 3mm to 80mm in Stainless Steel and Black Oxide Steel....

Design fully engages the shaft without marring or other damage. Two-piece collars are easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw collars. Effective on hard and ...

Traditional cost effective collar design. Bore Sizes 2mm x 50mm to 50mm x 50mm in Stainless Steel and Black Oxide Steel....

Climax Metal Step Down Clamp-On Shaft Adapters Are Designed To Repair, Alter, Increase, Decrease Or Extend Current Shafts. Climax Metal Step Down Clamp-On Shaft Adapters feature a clamping co...

Recessed screw head provides an outside surface free of major projections for safety. Bore Sizes 10-32 to 2-12 in Stainless Steel and Black Oxide Steel....

...

...

2-Piece Clamping Collars Fully Engage Shaft Without Marring. 2-Piece Clamping Collars are made of black oxide steel or stainless steel for heavy duty durability. Bore sizes range from <B&...

...

...

...