Corrosion Resistant Set Screw Collar CR, 5/32", 316 Stainless Steel

One-Piece Clamping Collar 1C-Series, Climax Metal, 1-3/8" bore, 2-1/4" outside diameter. Stainless Steel One-Piece Clamping Collar. Design fully engages the shaft without marring. Greater axial holding power than set screw collars. Effective on hard & soft shafts.

Two-Hole Set Screw Collar C-2H-Series, Climax Metal, 1/4" bore, 1/2" outside diameter. Black Oxide Plated Steel Two-Hole Set Screw Collars. Load capacity is nearly doubled by adding a second set screw hole at 90 degrees.

Corrosion Resistant Set Screw Collar CRC-Series, Climax Metal, 5/32" bore, 7/16" outside diameter. Yellow Zinc Dichromate Plated Steel Corrosion Resistant Set Screw Collar. Traditional collar design.

Two-Piece Clamping Collar 2C-Series, Climax Metal, 4-15/16" bore, 6-1/4" outside diameter. Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.

Corrosion Resistant Two-Piece Clamping Collar CR2C-Series, Climax Metal, 1-1/4" bore, 2-1/16" outside diameter. T316 Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.