Global Industrial™ Wall Bracket, 12"D, Gray

BEAMS Each level requires four. Use Double Rivet Beams on top and bottom levels of all units. Use Single Rivet Beams on all intermediate levels, or increase capacity by using Double Rivet Beams on all levels. Sample Unit: Heavy Duty, 5 shelf 48" x 24" Order; 6-48" & 6-24" Single Rivet Beams, 4-Uprights, 4-48" & 4-24" Double Rivet Beams: Extra Heavy Duty, 5 shelf, 48" x 24" Order; 4-Uprights, 10-48" & 10-24" Double Rivet Beams. Beams can be used as ledges at any required height to prevent merchandise from falling or rolling off shelves. Actual Length: 71.25"

Global Industrial™ Wall Mount 2 Cylinder Bracket This cylinder bracket easily mounts to a permanent vertical surface for safe cylinder storage. It supports cylinders from 3-1/2" to 12-1/2" in diameter. The 1-1/2" polypropylene strap has a steel cinch buckle. Mounting hardware is not included. Complies with OSHA and NFPA standards. STEEL BRACKET has a protective vinyl edge with an enamel finish.

All stainless steel construction wall mounted brackets Holds one cylinder from 4.0 to 12.0 inch diameter All steel, finishing, packaging, and labor made 100% in the USA and Canada Constructed from 12 Gauge Type 304 Stainless steel Edges are protected with steel reinforced vinyl edge guarding to help maintain your cylinders and provide extra grip Support straps are 1.5 inch wide by 54 inch long polypropylene with nylon snap buckle and rate a robust 1138 PSI and are the primary means of support as they enable the cylinders to be held tight and secure against the brackets Chain sets are ...

Storability® 1799 modular wall storage is the ideal way to store and organize large and heavy items securely on a wall in the maintenance room, factory, shop or any area that requires heavy-duty dependable storage. Includes many accessories to accommodate hard to store items that goes well beyond wire shelf storage. Storability® accessories lock on to the frame keeping items secure. Each accessory is easy to install and change position. Storability® accessory items will never fall off when your items are being removed or returned to their place. Each Storability® modular wall accessory is ...

The Omnimed Wall Mounting Bracket is designed specifically for the Cubbie File Storage Racks. The upper part of the bracket mounts to the bottom of the Cubbie File while the lower part is mounted to the wall. Hardware is provided to mount to the Cubbie File, but the customer will need to provide their own wall mounting hardware. Powder coated light gray finish. Sold in pack of 2. For use with the Omnimed® Cubbie File Storage Racks. Global Item Numbers B1917428 and B1917430.