Maxline Rapidair M8010, 1/2" Tee Fitting

Features: Press Style Fitting 2" For Use With Flex Tubing Fitting Is Comprised Of: Nickle Plated Brass Body; Crimp Ring Is Stainless Steel; And Double Nitrile O-Ring Requires press tool

The Maxline 1/2 in. tubing, Plastic Tubing Clamp (10-Pack), is designed to mount 1/2 in. Maxline, tubing. Single mounting screw hole allows for fast installation time. Recommended clamp spacing is 36 in.

Use only with Maxline® system. The Maxline® 1 in. tubing x 1/2 in. tubing, Reducing Union fitting, features a compression fitting style to make fast and easy connections. There is no glue, soldering or crimping needed. Simply cut the tubing to length, insert in the fitting and tighten. Double o-ring compression style fitting, tubing can be removed from fitting if needed.

Use only with Rapidair® Home Garage 1/2 in. OD x 3/8 in. ID nylon tubing system. The Rapidair® 1/2 in. tubing x 1/2 in. tubing Union fitting, features a push to connect style to make fast and easy connections. There is no glue, soldering or crimping needed. Simply cut the tubing to length and insert the tubing into the fitting. Tubing can be released by push button if desired.

Use only with Maxline® 1 in. and 3/4 in. system only. The Maxline® 1 in. tubing x 1/2 in. x 1in. tubing, Reducing Drop Leg fitting, features a compression fitting style to make fast and easy connections. There is no glue, soldering or crimping needed. Simply cut the tubing to length, insert in the fitting and tighten. Features: Tubing on all three sides 1"(A) x 3/4"(C) x 1"(A)