+

Frequently Purchased Together
Customers Also Viewed
Maple butcher-block bench top is kiln dried, electronically glued, then cured and sanded smooth. Finished with a penetrating mineral oil protectant. You can't buy a better all-purpose bench top. Tops must be oiled on all surfaces every 1-2 weeks depending on use or conditions for up keep.
Work Surface Cleaning:
Mild house hold cleaners such as soap and water solutions, Windex, and Lysol are recommended for surface cleaning. Aggressive chemicals such as Ammonia and Solvents should be avoided, and may cause permanent damage to the finish.
Weights & Dimensions
- Depth 30 in
- Width 96 in
- Thickness 1-3/4 in
- Weight 141 lbs
Product Details
- Food Safe Yes
- Add On Type Bench Top
- Country of Origin USA
- Assembly Required Yes
- Edge Type Square
- Brand Global Industrial
- Material Maple Butcher Block
- Manufacturers Part Number 607287
- Color Family Brown
Most Recent Reviews
- Most Recent Reviews
- Highest Rated Reviews
- Lowest Rated Reviews
-
Reviewer: PAUL
Date: July 07, 2021
-
Reviewer: Matthew
Date: February 24, 2021
Your review:
I ordered these for bathroom sink counters for a factory building that is turned into an office building. They super heavy duty and much nicer than I expected and match the theme of the building. 1 3/4" is also much nicer than the traditional 1 1/2 or 1 1/4" butcher block. Finished with waterlox. -
Reviewer: Roger
Date: February 10, 2021
Your review:
An excellent workbench. -
Reviewer: BRYAN
Date: December 10, 2020
Your review:
Awesome tops -
Reviewer: Kyle
Date: November 02, 2020
Your review:
Very nice, smooth top. I use them as stand up desks where we handle a lot of heavy 40-110 pound parts for listing descriptions. -
Reviewer: DONALD
Date: July 06, 2020
Your review:
Maple benchtop arrived in good shape. A few small areas on the bottom needed additionally filling material, and a few worm holes needed attention. The top side looks great, mostly heartwood with areas of sapwood. Color and figure in the top side are stunning. A little extra sanding, rounding of the edges and sealing make this a highly affordable benchtop that will last for years. Used danish oil to really bring out a warm glow and character. Highly recommend! -
Reviewer: CASIE
Date: April 21, 2020
Your review:
Package arrives early, product was undamaged and it looked good. -
Reviewer: MARK
Date: January 06, 2020
Your review:
Awesome quality. Arrived safely. Will make for a fantastic long term garage workbench. -
Reviewer: Anonymous
Date: November 08, 2018
Your review:
makes a great kitchen island, solid man -
Reviewer: Anonymous
Date: July 18, 2018
Your review:
Nice looking however there was a bit of a knot but it was fairly smooth when you ran your hand across it. The truck delivery was fast and there were no dents or dings due to shipping.
There are 5 questions and 5 answers for this product.
-
Can these be cut down to size and resanded?
Question Asked By: Mary, January 23, 2021
Answer This Question
Question Answered By:
-
Product Expert, January 28, 2021
Hello, it is not recommended to cut the board. Thank you for your interest in our products.
-
-
I want to use the workbenh top for an office desk. Could I drill 2.5" holes to run cables thru?
Question Asked By: Felecia, June 27, 2020
Answer This Question
Question Answered By:
-
Product Expert, June 29, 2020
Hello, yes, this unit allows for a hole to be drilled to the top. Thank you for your interest in our product.
-
-
Can this be cut with a circular saw?
Question Asked By: Jeanne, January 09, 2020
Answer This Question
Question Answered By:
-
Product Expert, January 10, 2020
Hello, it is not recommended that this item be cut with a circular saw. Thank you for your question.
-
-
Is the manufacturer's name "Global Industrial" burnt into both long edges or just one?
Question Asked By: Randy, July 18, 2017
Answer This Question
Question Answered By:
-
anonymous
Hello Randy, The brand is on one side. Thank you for your interest in our product.
-
-
Are your maple work bench tops made in USA or imported?
Question Asked By: Nate, July 29, 2011
Answer This Question
Question Answered By:
-
Product Expert, July 28, 2011
The Maple Work Bench Tops are made in the USA.
-

Global Industrial 96"W x 30"D x 1-3/4"H Maple Butcher Block Square Edge Workbench Top
$439.95
- Product Information
- Photo/Video Gallery
- Customer Review
- Product Q&A
- Accessories