| |
16C Collets |
 |
|
|
|
|
|
Toolmex 16C Collets Are Ideal For Holding Workpieces, Tools And More.
Toolmex 16C Collets have round ends and kerfs along the side tht allow it to expand and contract. Concentricity guaranteed to 0.0004". Sizes vary.
Click for more |
|
|
|
|
5C Collets, Metric |
|
|
|
|
|
|
Toolmex 5C Metric Collets Are Ideal For Holding Workpieces, Tools And More.
Toolmex 5C Metric Collets are made for long lasting durability and dependability. feature round ends and kerfs along the side that allow them to expand and contract. Concentricity is guaranteed to 0.0004. Available in3mm to 26mm sizes.24 Piece Set also available.
Click for more |
|
|
ER Collet Chucks, CAT |
|
|
|
|
|
|
ER Collet Chucks (CAT) Feature Through The Spindle Coolant Capability.
ER Collet Chucks (CAT) have a solid construction for long lasting durability. Choose from CAT 40 and CAT 50 models. Length and collet size vary. Wrench sold separately.
Click for more |
|
|
|
|
Slitting & Slotting Saw Arbors |
|
|
|
|
|
|
Toolmex Slitting And Slotting Saw Arbors Are Precision-Crafted For Dependability.
Toolmex Slitting And Slotting Saw Arbors are made of alloy steel for long lasting durability. All models feature a rigid arbor and extended length weldon shank The arbors are crafted to a T.I.R.of no more than .002" for optimum performance. Click for more |
|
|
NMTB Flange Tooling |
|
|
|
|
|
|
Toolmex NMTB Flange Tooling Provides Everything Needed For Successful NMTB Flange Use.
Toolmex NMTB Flange Tooling includes Collet Chucks, Stub Collet Chucks, Spring Collet Chucks and Collet Chucks with a Nut, as well as a selection of nuts and wrenches. Sizes and shank types vary, including NMTB, NST/NMTB, R8 and coolant tubes. Sets are available for select products. Click for more |
|
|
|
|
Shell End Mill Holders |
|
|
|
|
|
|
Shell End Mill Holders Are Ideal For Efficient Holding Of End Mills In A Variety Of Work Applications.
Shell End Mill Holders are made of steel for long lasting durability. Shell mill pilot T.I.R. less than .0002". Available with a wide variety of set screw thread sizes for increased versatility. Retention knob sold separately. Tapers are CAT 40 and CAT 50. Click for more |
|
|
ER Spring Collets |
|
|
|
|
|
|
Toolmex ER Spring Collets And Collet Sets Vary Widely For Increased Versatility.
Toolmex ER Spring Collets And Collet Sets feature collets with springs for added flexibility. Kerfs along the sides allow them to expand and contract. Concentricity is guaranteed at 0.0004". Sizes vary and are available in both inch and metric models. Choose from sets with different piece options. Click for more |
|
|
|
|
Integral Drill Chucks |
|
|
|
|
|
|
HSK 50A, 63A And 100A Integral Drill Chucks Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
HSK 50A, 63A and 100A Integral Drill Chucks are made of solid alloy forged steel for long lasting durability and reliability.Tooling shank DIN 69893 standard. Self-tightening, keyless operation for ease of use. .05" drill capacity. Click for more |
|
|
Milling Chucks CAT 40 and 50 |
|
|
|
|
|
|
CAT 40 And 50 Milling Chucks Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
CAT 40 and 50 Milling Chucks are made of solid alloy forged steel for long lasting durability and reliability. Rigid with high chucking torque. T.I.R. .0002". Balanced to 15000 G 2.5 RPM. CAT40 and CAT50 tapers available in .75" and 1.25" size and 3. Click for more |
|
|
|
|
Milling Chucks BT 30, 40 and 50 |
|
|
|
|
|
|
BT 30, 40 And 50 Milling Chucks Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
BT 30, 40 And 50 Milling Chucks are made of solid alloy forged steel for long lasting durability and reliability. Rigid with high chucking torque. T.I.R. .0002". Balanced to 15000 G 2.5 RPM. Click for more |
|
|
HSK Coolant Tubes |
|
|
|
|
|
|
HSK Coolant Pipes Are Designed For Use With HSK Holders.
HSK Coolant Pipes are made of solid alloy forged steel for long lasting durability and reliability. Especially designed for use with HSK holders. Includes outside diameters of 6" (HSK32), 8" (HSK40), 10" (HSK50), 12" (HSK63), 14" (HSK80) and 16" (HSK100).
Click for more |
|
|
|
|
Retention Knobs |
|
|
|
|
|
|
Retention Knobs Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
Retention Knobs are made of solid alloy forged steel for long lasting durability and reliability. 45° 60° and 90° available in Solid and Coolant Through style, BT and CAT tapers and various Standard and Metric lengths.
Click for more |
|
|
Back Up Adjustment Screws for ER Collet Chucks |
|
|
|
|
|
|
Adjustable Back Up Screws Are Designed For ER Collet Chucks
Adjustable Back Up Screws are made of solid alloy forged steel for long lasting durability and reliability. Available for ER11, ER16, ER20, ER25, ER32 and ER40 collet sizes.
Click for more |
|
|
|
|
MT to JT Adapters, Precision Drill Chuck Arbors |
|
|
|
|
|
|
Drill Chuck Arbors Are Precision-Crafted In A Variety Of MT/JT Adapters.
Precision Drill Chuck Arbors are made of alloy steel and hardened to Rc 56~60 for long lasting durability. All models are precision-tested and certified to a .0015" T.I.R. maximum. Available with MT1, MT2, MT3, MT4 and MT5 shanks and JT1, JT2, JT3, JT4, JT5, JT6 and JT33 mounts.
Click for more |
|
|
Shell Mill Holders |
|
|
|
|
|
|
Shell Mill Holders Are Ideal For Machinists, Metalworkers And Other Precision Tooling Applications.
Shell Mill Holders are made of solid alloy steel for long lasting durability and dependability. Hardened to Rc 56-60. Maximum T.I.R. .0004". Available in NST30, NST40 and NST50 shank and various weights.
Click for more |
|
|
|
|
Quick Change Tool Post Sets and Individual Tool holders |
|
|
|
|
|
|
Toolmex Quick Change Tool Post Sets and Individual Tool Holders Are Ideal For Use With Lathes.
Toolmex Quick Change Tool Post Sets and Individual Tool Holders are made of alloy steel for long lasting durability. The tooling is precision hardened and ground for long life. The models accommodate lathe capacities ranging from 8" to 11.5".
Click for more |
|
|
Shell End Mill Holder Spare Parts |
|
|
|
|
|
|
Toolmex Shell End Mill Holder Replacement Parts Include Arbor Screws, Key Screws And Keys.
Toolmex Shell End Mill Holder Replacement Parts are made of alloy steel and hardened to Rc 56~60 for long lasting durability. These models accommodate arbor diameters of ¾" to 2" and a variety of thread sizes.
Click for more |
|
|
|
|
DA Collet Extensions |
|
|
|
|
|
|
Toolmex DA Collet Extensions Are Guaranteed To A Concentricity Of .0004 Inches.
Toolmex DA Collet Extensions are made of alloy steel for long lasting durability and are guaranteed to a concentricity of .0004" for optimum performance. These models accommodate DA 100, 180 and 200 collets and a variety of shank dimensions.
Click for more |
|
|
Floating Reamer Holders |
|
|
|
|
|
|
Toolmex Floating Reamer Holders Are Available For A Variety of Shank Types.
Toolmex Floating Reamer Holders are made of alloy steel and hardened to Rc 56~60 for long lasting durability. These holders are available forstraight and tapered shanks, including BT, CAT, MT, NST and R8 types.
Click for more |
|
|
|
|
ER Collet Chucks and Accessories |
|
|
|
|
|
|
Toolmex ER Collet Chucks And Accessories Are Precision-Crafted For Dependability.
Toolmex ER Collet Chucks And Accessories are made of alloy steel for long lasting durability. These models feature chucks as well as a variety of mini nuts and wrenches for ER11, ER16, ER20 and ER32 collets.
Click for more |
|
|
Solid Sockets with MT Hole |
|
|
|
|
|
|
Toolmex Solid Sockets Are Precision-Crafted For Dependability.
Toolmex Solid Sockets are made of alloy steel and hardened to Rc 56~60 for long lasting durability. All models are crafted to a T.I.R.of less than .0004". The tooling is precision hardened and ground for maximum accuracy. Models available: Socket Numbers 1 through 19.
Click for more |
|
|
|
|
Straight Shank Annular Cutter Holders |
|
|
|
|
|
|
Toolmex Straight Shank Annular Cutter Holders Are Available For A Variety of Shank Types.
Toolmex Straight Shank Annular Cutter Holders are made of alloy steel for long lasting durability. The holders feature a3/4" cutter shank size, gage lengths of up to 12" and are available in 2- and 3-flat straight shank models.
Click for more |
|
|
Stub Milling Machine Arbors, Weldon Shank |
|
|
|
|
|
|
Toolmex Stub Milling Machine Arbors Are Precision-Crafted For Dependability.
Toolmex Stub Milling Machine Arbors are made of alloy steel and hardened to Rc 56~60 for long lasting durability. All models are precision-tested and certified to a .0004" T.I.R. maximum and and feature a weldon shank and LH thread. The shanks are available in 1/2" and 3/4" diameters. Click for more |
|
|
|
|
Tap Holders |
|
|
|
|
|
|
Toolmex Tap Holders And Adapters Are Precision Crafted To Ensure Accurate Tapping.
Toolmex Tap Holders And Adapters are made of alloy steel for long lasting durability. The tap holders are available in a variety of models, including rigid, tension/compression and torque control. Click for more |
|
|
Tool Tightening Fixtures |
|
|
|
|
|
|
Toolmex Tool Tightening Fixtures Feature Strong Gripping Power
Toolmex Tool Tightening Fixtures are made of heavy duty alloy steel for long lasting durability. The fixtures provide maximum gripping power when changing tools and are available in a variety of taper applications, including universal, and also feature horizontal and vertical modes for ease of use.
Click for more |
|
|
|
|
DA Collet Chucks, CAT |
|
|
|
|
|
|
DA Collet Chucks (CAT) Feature Through The Spindle Coolant Capability.
DA Collet Chucks (CAT) have a solid construction for long lasting durability. Choose from CAT 40 and CAT 50 models. Collet ranges include 1/8-3/4, 1/8-9/16 and 1/8-25/64. Collet seat taper T.I.R. is less than 0.0002". Lengths vary. Retention knob sold separately.
Click for more |
|
|
ER Collet Chuck Sets, CAT |
|
|
|
|
|
|
ER Collet Chuck Sets (CAT) Are Available With Varying Pieces And Sizes.
ER Collet Chuck Sets (CAT) are made for long lasting durability and dependability. Feature chucks with through the spindle coolant capability. Choose from9, 13 and 17 piece sets withCAT40 and CAT50 tapers. Secured in handy wooden box with metal clasps. Wrench sold separately
Click for more |
|
|
|
|
Face Mill Holders |
|
|
|
|
|
|
Face Mill Holders Are Designed To Hold 8" Or Larger Face Mill Cutters.
Face Mill Holders have a shell mill pilot T.I.R. of less than 0.0002". Choose from models with 2" or 2-1/2" arbor diameters. Provided with four mounting holes with 5/8"-11 thread on a 4" bolt circle diameter in order to securely hold 8" or larger face mill cutters. Weights vary. Retention knob sold separately. Click for more |
|
|
Jacobs Taper Holders |
|
|
|
|
|
|
Jacobs Taper Holders Are Ideal For A Variety Of Drilling And Other Work Applications.
Jacobs Taper Holders are made of alloy steel for long lasting durability. Retention knobs sold separately. Tapers are CAT 40 and CAT 50. Jacobs tapers are JT2, JT3, JT4, JT5, JT6 and JT33. Weights and lengths vary per model.
Click for more |
|
|
|
|
Keyless Drill Chucks Integral CAT V-Flange |
|
|
|
|
|
|
Keyless Drill Chucks Integral CAT V-Flange Are Produced According To AT3 Specifications.
Keyless Drill Chucks Integral CAT V-Flange are made of forged steel for long lasting durability. Designed for keyless operation and feature a max T.I.R. less than 0.0015". Tapers are CAT 40 and CAT 50. Capacities are 1/32 - 1/2" and 1/8 - 5/8". Weights are 4.4 lbs, 5. Click for more |
|
|
Morse Taper Adapters |
|
|
|
|
|
|
Morse Taper Adapters Are Ideal For Adapting Smaller Morse Taper Centers To Fit Machines Requiring Larger Morse Taper Centers.
Morse Taper Adapters are made of alloy forged steel for long lasting durability. Seat T.I.R. less than 0.0002". Produced accuracy to AT3 specifications. Tapers are CAT 40 and CAT 50. Morse tapers are MT2, MT3, MT4 and MT5. Click for more |
|
|
|
|
Semi Flush Slitting Saw Holders |
|
|
|
|
|
|
Semi Flush Slitting Saw Holders Are Designed For Slitting Saws Up To 5/16" Thick.
Semi Flush Slitting Saw Holders are made of steel for long lasting durability. Face is held perpendicular to centerline within 0.0002". Designed for slitting saws up to 5/16" thick. Use Stub Arbor Holder for wider cutters. Click for more |
|
|
Stub Arbor Holders |
|
|
|
|
|
|
Stub Arbor Holders Provide A Heavy-Duty Locking Right Hand Nut Allowing For Efficient Work Operations.
Stub Arbor Holders are made of steel for long lasting durability. Face held perpendicular to centerline with .0002". Pilot diameter sized for precision fit with cutter and keyed for positive drive. Heavy duty locking right-hand nut. Tapers are CAT 40 and CAT 50. Click for more |
|
|
|
|
TG Collet Chuck Sets |
|
|
|
|
|
|
TG Collet Chuck Sets Are Ideal For Maximizing Efficiency In Milling, Grinding, Drilling and Tapping Operations.
TG Collet Chuck Sets are stored in wooden case for long lasting durability. Each Cat40 or Cat50 Collet Chuck Set includes assortment of TG 100 collets, spanner wrench, collet nut and wooden case. Produced according to AT3 specifications. Click for more |
|
|
TG Collet Chucks, CAT |
|
|
|
|
|
|
TG Collet Chucks Provide A Strong Clamping Force On Tightened Object During Milling, Drilling And Other Work Operations.
TG Collet Chucks are made of steel for long lasting durability. Feature through the spindle coolant capability. Taper T.I.R. is less than 0.0002". Lengths are 3", 3-1/8", 4", 5-1/2", 6" and 7-1/2". Tapers are CAT 40 and CAT 50. Click for more |
|
|
|
|
End Mill Holders |
|
|
|
|
|
|
End Mill Holders Are Ideal For Machinists, Metalworkers And Other Precision Tooling Applications.
End Mill Holders are made of high speed steel for long lasting durability and dependability. Jacobs taper T.I.R. less than .0002". Produced according to AT3 specifications. Available in BT40 and BT50 taper and various set screw thread sizes.
Click for more |
|
|
DA Collet Sets |
|
|
|
|
|
|
DA Collet Sets Are Concentricity Guaranteed To 0.0004".
DA Collet Sets include feature collets with a sturdy construction for reliability and long lasting durability. Available in sets of 5, 9, 11, 17, 21 and 33. Ranges and collet sizes vary.
Click for more |
|
|
|
|
ER Collet Sets |
|
|
|
|
|
|
ER Collet Sets Are Concentricity Guaranteed To 0.0004".
ER Collet Sets feature collets with a sturdy construction for reliability and long lasting durability. Choose from sets of 7, 10, 11, 12, 14, 15, 18 and 23. Ranges and collet sizes vary.
Click for more |
|
|
Shell End Mill Holders with Weldon Shanks |
|
|
|
|
|
|
Shell End Mill Holders With Weldon Shanks Come In A Variety Of Arbor Screw Thread Sizes For Increased Versatility.
Shell End Mill Holders With Weldon Shanks are made of alloy steel for long lasting durability. Choose from models with 2" or 2.28" shank lengths. Arbor screw thread sizes include 1/2-20, 3/8-24, 3/8-25 and 5/8-18.
Click for more |
|
|
|
|
End Mill Holders with R8 Shank |
|
|
|
|
|
|
End Mill Holders With R8 Shank Are Hardened To Rc 56-60 For Added Strength.
End Mill Holders With R8 Shank are made of alloy steel for long lasting durability. Shell end mill pilot T.I.R. is less than 0.0004". Set screw thread sizes and hole diameters vary. End Mill Holder Sets of 5 pieces or 8 pieces are also available.
Click for more |
|
|
Jacobs Taper Adapters |
|
|
|
|
|
|
Jacobs Taper Adapters Are Hardened To Rc 56-60 For Added Strength.
Jacobs Taper Adapters are precision drill chuck arbors made of alloy steel for long lasting durability. Max T.I.R. is 0.0015". The shank type is R8 and chuck mounts include JT1, JT2, JT3, JT4, JT5, JT6 and JT33. Weights and lengths vary.
Click for more |
|
|
|
|
Shell End Mill Arbors with R8 Shank |
|
|
|
|
|
|
Shell End Mill Arbors With R8 Shank Are Ideal For Precision Machining Applications.
Shell End Mill Arbors With R8 Shank are made ofalloy steel for long lasting durability and dependability. Hardened to Rc 56-60. Maximum T.I.R. .0004 inches. Available in1/2, 3/4, 1, 1-1/4 and 1-1/2 inch arbor diameters.
Click for more |
|
|
Slitting Saw Stub Mill Arbors with R8 Shank |
|
|
|
|
|
|
Slitting Saw Stub Mill Arbors With R8 Shank Are Hardened To Rc 56-60 For Added Strength.
Slitting Saw Stub Mill Arbors with R8 Shank are made of alloy steel for long lasting durability. Max T.I.R. is 0.0004". Choose from wrench sizes of 1.25" or 1.5". Shank diameter is R8.
Click for more |
|
|
|
|
End Mill Holder Sets |
|
|
|
|
|
|
End Mill Holders And Sets Are Ideal For Precision Machining Applications.
End Mill Holders And Sets are made ofalloy steel for long lasting durability and dependability. Hardened to Rc 56-60. Shell end mill pilot T.I.R. less than .0004 inches. Click for more |
|
|
End Mill Holders with MT Shank |
|
|
|
|
|
|
End Mill Holders With MT Shank Are Available With Tanged Ends Or Draw Bar Ends.
End Mill Holders With MT Shank are made alloy steel for long lasting durability. They are hardened to Rc 56-60 for added strength and have a shell end mill pilot T.I.R. of less than 0.0004¿. Hole diameters, MT shank sizes and set screw thread sizes vary.
Click for more |
|
|
|
|
ER Rubber Sealed Collets, Metric |
|
|
|
|
|
|
Metric ER Rubber Sealed Collets Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
Metric ER Rubber Sealed Collets are made of solid alloy forged steel for long lasting durability and reliability. Unique self-releasing system eliminates sticking. Concentricity of .0004". Wide selection available to meet particular application. Click for more |
|
|
ER Jetstream Sealed Collets, Metric |
|
|
|
|
|
|
Metric ER Jetstream Rubber Sealed Collets Are Designed For Use With Non Coolant Through Tools.
ER Jetstream Rubber Sealed Collets are made of solid alloy forged steel for long lasting durability and reliability. Coolant is directed to the cutting edge. 600 PSI maximum coolant pressure. Unique self-releasing system eliminates sticking. Concentricity of .0004". Click for more |
|
|
|
|
Straight Milling Chuck Collets |
|
|
|
|
|
|
Straight Milling Chuck Collets Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
Straight Milling Chuck Collets are made of solid alloy forged steel for long lasting durability and reliability. Unique self-releasing system eliminates sticking. Concentricity of .0004". Wide selection available to meet particular application. Click for more |
|
|
Integral Drill Chucks BT 30, 40 and 50 |
|
|
|
|
|
|
Integral Drill Chucks Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
Integral Drill Chucks are made of solid alloy forged steel for long lasting durability and reliability. Self-tightening, keyless operation for ease of use. T.I.R. .00015". Available in BT30, BT40 and BT50 taper and for maximum diameter of 5/16" 1/2" and 5/8". Click for more |
|
|
|
|
Shell End Mill Holders BT 30, 40 and 50 |
|
|
|
|
|
|
Shell End Mill Holders Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
Shell End Mill Holders are made of solid alloy forged steel for long lasting durability and reliability. Hardened to 52-56Rc. Pilot T.I.R. less than .0002". Available in BT30, BT40 and BT50 taper and 3/4", 1", 1-1/4" and 1-1/2" and 2" arbor. Click for more |
|
|
ER Collet Chucks BT 30, 40 and 50 |
|
|
|
|
|
|
BT 30, 40 And 50 ER Collet Chucks Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
BT 30, 40 And 50 ER Collet Chucks are made of solid alloy forged steel for long lasting durability and reliability. Hardened to 52-56Rc. Pilot T.I.R. less than .0002". Click for more |
|
|
|
|
End Mill Holders BT 30, 40 and 50 |
|
|
|
|
|
|
BT 30, 40 And 50 End Mill Holders Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
Tapered End Mill Holders are made of solid alloy forged steel for long lasting durability and reliability. Hardened to 52-56Rc. Jacobs taper T.I.R. less than .0002". Click for more |
|
|
Integral Drill Chucks CAT 40 and 50 |
|
|
|
|
|
|
CAT 40 And 50 Integral Drill Chucks Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
CAT 40 And 50 Integral Drill Chucks are are made of solid alloy forged steel for long lasting durability and reliability. Hardened to 52-56Rc. Morse taper seat T.I.R. less than .0002". Self-tightening, keyless operation for ease of use. Click for more |
|
|
|
|
End Mill Holders CAT 40 and 50 |
|
|
|
|
|
|
CAT 40 And 50 End Mill Holders Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
CAT 40 And 50 End Mill Holders are made of solid alloy forged steel for long lasting durability and reliability. Through the spindle coolant capability. End mill socket T.I.R. less than .0002". Balanced to 15000 G 2.5 RPM. Click for more |
|
|
Shell End Mill Holders |
|
|
|
|
|
|
CAT 40 And 50 Shell End Mill Holders Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
CAT 40 And 50 Shell End Mill Holders are made of solid alloy forged steel for long lasting durability and reliability. Shell mill pilot T.I.R. less than .0002". Balanced to 15000 G 2.5 RPM. Click for more |
|
|
|
|
ER Collet Chucks CAT 40 |
|
|
|
|
|
|
CAT 40 And 50 ER Collet Chucks Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
CAT 40 And 50 Collet Chucks are made of solid alloy forged steel for long lasting durability and reliability. Through the spindle coolant capability. Balanced to 25000 G 2.5 RPM. Click for more |
|
|
Shell Mill Holders HSK 63A and 100A |
|
|
|
|
|
|
HSK 63A And 100A Shell Mill Holders Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
HSK 63A and 100A Shell Mill Holders are made of solid alloy forged steel for long lasting durability and reliability. Tooling shank DIN 69893 standard. Balanced to 15000 G 2.5 RPM. Click for more |
|
|
|
|
ER Collet Chucks HSK 50A, 63A and 100A |
|
|
|
|
|
|
HSK 50A, 63A and 100A Collet Chucks Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
HSK 50A, 63A and 100A Collet Chucks are made of solid forged steel for long lasting durability and reliability. T.I.R. .0004". Balanced to 25000 G 2.5 RPM. Click for more |
|
|
End Mill Holders HSK 63A and 100A |
|
|
|
|
|
|
HSK 63A And 100A End Mill Holders Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
HSK 63A and 100A End Mill Holders are made of solid alloy forged steel for long lasting durability and reliability. Tooling shank DIN 69893 standard. Balanced to 15000 G 2.5 RPM. HSK63A and HSK100A shank types available in various thread sizes and 2. Click for more |
|
|
|
|
Milling Chucks HSK 50A, 63A |
|
|
|
|
|
|
HSK50A And 63A Milling Chucks Are Ideal For Heavy Duty Lathe Operations, Metalworking And Other Precision Machining Applications.
HSK50A and 63A Milling Chucks are made of solid alloy forged steel for long lasting durability and reliability. Use for heavy duty operations. Balanced to 15000 G 2.5 RPM. HSK50A shank available in C20mm bore size and 4.72" length. Click for more |
|
|
Collet Chuck Kits |
|
|
|
|
|
|
Collet Chuck Kits Bring Together A Variety Of Precision Tools For Lathe Operators, Metalworkers And Other Machining Professionals.
Every item in these Collet Chuck Kits is solidly made for long lasting durability and reliability. Each kit includes a Collet Chuck, an assortment of ER Collets, a Spanner Wrench and a Collet Nut. All handily contained in a solid Wooden Case. Click for more |
|
|
|
|
ER Collet Chucks with Cylindrical Shanks |
|
|
|
|
|
|
ER Collet Chucks With Cylindrical Shanks Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
ER Collet Chucks With Cylindrical Shanks are are made of solid alloy forged steel for long lasting durability and reliability. Wide selection available to meet particular application. Available in collet sizes ER11, ER16, ER20, ER25, ER32 and ER40. Click for more |
|
|
ER Rubber Sealed Collets |
|
|
|
|
|
|
ER Rubber Sealed Collets Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
ER Rubber Sealed Collets are made of solid alloy forged steel for long lasting durability and reliability. Unique self-releasing system eliminates sticking. Concentricity of .0004". Wide selection available to meet particular application. Click for more |
|
|
|
|
ER Jetstream Sealed Collets |
|
|
|
|
|
|
ER Jetstream Rubber Sealed Collets Are Designed For Use With Non Coolant Through Tools.
ER Jetstream Rubber Sealed Collets are made of solid alloy forged steel for long lasting durability and reliability. Coolant is directed to the cutting edge. 600 PSI maximum coolant pressure. Unique self-releasing system eliminates sticking. Concentricity of .0004". Click for more |
|
|
R8 Collets, Metric |
|
|
|
|
|
|
R8 Metric Collets Are Ideal For Lathe Operations, Metalworking And Other Precision Machining Applications.
R8 Metric Collets are solidly made for long lasting durability and reliability. Concentricity guaranteed to .0004". Wide assortment of 2mm though 20mm metric sizes available.
Click for more |
|
|
|
|
Retention Knobs |
|
|
|
|
|
|
Retention Knobs Lock Tools Securely In Place.
Retention Knobs are solidly made for long lasting durability and reliability. Available for tools with CAT50, CAT40 Haas and CAT 40 Shanks
Click for more |
|
|
Wrenches and Nuts for Collet Chucks, Drill Chucks, and Milling Chucks |
|
|
|
|
|
|
Wrenches And Nuts Designed For Use With Collet Chucks.
A wide selection of wrenches and nuts especially made for collet chucks. Solidly made for long lasting durability and reliability. Includes Hook, Hex and Spanner Wrenchs and precision made Collet Nuts in various sizes.
Click for more |
|
|
|
|
BT Flange Tooling |
|
|
|
|
|
|
Toolmex BT Flange Tooling Features A Wide Variety Of Pieces For Increased Versatility.
Toolmex BT Flange Tooling includes Flange Collet chucks, Flange Integral Drill Chucks, Jacobs Taper 3 Adapters, Extension Type Collet Chucks, Shell End Mill Adapters, End Mill Holders and a collection of nuts, screws and wrenches. Click for more |
|
|
CAT V-Flange Tooling |
|
|
|
|
|
|
| Toolmex CAT V-Flange Tooling Provides Everything Needed For Successful V-Flange Use. Click for more |
|
|
|
|
TG Collets |
|
|
|
|
|
|
Toolmex TG Collets Are Completely Interchangeable With All Leading Brands.
Toolmex TG Collets are hardened and ground for long lasting durability. These single angle collets are concentricity guaranteed to 0.0004". Sizes vary. Also available in sets.
Click for more |
|
|
DA Collets |
|
|
|
|
|
|
Toolmex DA Collets Are Ideal For Holding Workpieces, Tools And More.
Toolmex DA Collets feature full length kerfs for increased versatility. Concentricity guaranteed to 0.0004". Sizes vary. Also available in sets.
Click for more |
|
|
|
|
DA Collets, Metric |
|
|
|
|
|
|
Toolmex Metric DA Collets Are Ideal For Holding Workpieces, Tools And More.
Toolmex DA Collets feature full length kerfs for increased versatility. Concentricity guaranteed to 0.0004". Round sizes range from 3mm to 11mm.
Click for more |
|
|
5C Collets and Accessories |
|
|
|
|
|
|
Toolmex 5C Collets And Accessories Vary Widely For Increased Versatility.
Toolmex 5C Collets And Accessories feature collets with round ends and kerfs along the side that allow them to expand and contract. Concentricity guaranteed to 0.0004". 1/16" Emergency 5C Collets are made of steel for added strength. Click for more |
|
|
|
|
R8 Collets |
|
|
|
|
|
|
Toolmex R8 Collets Feature Springs For Added Flexibility.
Toolmex R8 Collets have round ends and kerfs along the side that allow them to expand and contract. Concentricity is guaranteed to 0.0004". Sizes vary and sets are available.
Click for more |
|
|
ER Spring Collets and Collet Sets, Metric |
|
|
|
|
|
|
Toolmex ER Spring Metric Collets And Collet Sets Vary For Increased Versatility.
Toolmex ER Spring Metric Collets And Collet Sets feature collets with springs for added flexibility. Kerfs along the sides allow them to expand and contract. Concentricity is guaranteed at 0.0004". Sizes and set numbers vary.
Click for more |
|
|
|
|
Drill Chucks |
|
|
|
|
|
|
Shank Drill Chucks- With integral shank
- Keyless drill chuck
Click for more |
|
|
HSK Tooling |
|
|
|
|
|
|
Toolmex HSK Tooling Features Shanks That Are Short And Hollow, And Provide Clamping From The Inside.
Toolmex HSK Tooling includes Integral Shank Keyless Drill Chucks, End Miller Holders, Form A End Mill Holders and Jacobs Taper Holders. Holders provide improved rigidity during operation. Sizes vary from model to model.
Click for more |
|
|
|
|
Drill Drifts |
|
|
|
|
|
|
Toolmex Drill Drifts Remove Shanks Quickly And Easily.
Toolmex Drill Drifts are designed for removing Morse Taper shanks from Morse Taper sleeves and spindles. Drifts are fully drop forged and zinc plated for heavy duty use, and are hardened for long lasting durability. Sizes range from #1 to #4. Drill Drift 4-Piece Set is available and includes all four sizes.
Click for more |
|
|
Eject Collars and Arbor Keys for Shell Reamer Arbors |
|
|
|
|
|
|
Toolmex Eject Collars And Arbor Keys For Shell Reamer Arbors Allow Users To Choose The Appropriate Style For An Application.
Toolmex Eject Collars And Arbor Keys For Shell Reamer Arbors provide increased versatility. The Shell Reamer Arbors have straight shanks made of alloy steel and are hardened to Rc 56-60 for added strength. Max T.I.R. is 0.0004". Click for more |
|
|
|
|
Morse Taper to Threaded Mount Adapters |
|
|
|
|
|
|
Toolmex Morse Taper To Threaded Mount Adapters Make Conversion Quick And Easy.
Toolmex Morse Taper To Threaded Mount Adapters feature Precision Drill Chuck Arbors that are made of alloy steel. Arbors are hardened to Rc 56-60 for added strength and have a max T.I.R. of 0.0015". Sizes vary, though the shank type is consistently MT2.
Click for more |
|
|
MT Face Mill Holders |
|
|
|
|
|
|
Toolmex MT Face Mill Holders Are Made Of Alloy Forged Steel For Long Lasting Durability.
Toolmex MT Face Mill Holders feature a shell end mill pilot T.I.R. that is less than 0.0004". NST taper is produced according to AT3 specifications. Arbor length, shank sizes and hole diameters vary.
Click for more |
|
|
|
|
MT Shank Annular Cutter Holders |
|
|
|
|
|
|
Toolmex MT Shank Annular Cutter Holders Allow Different Machines To Drive The Cutter.
Toolmex MT Shank Annular Cutter Holders feature Morse Taper shanks. Shank size, cutter shank size, gage length and style all vary.
Click for more |
|
|
Shell End Mill Arbors with MT Shank |
|
|
|
|
|
|
Toolmex Shell End Mill Arbors, Style A With MT Shanks, Are Precision-Crafted For Industrial Applications.
Toolmex Shell End Mill Arbors are made of alloy steel and hardened to Rc 56~60 for long lasting durability. All models are crafted to a T.I.R.of less than .0004". Available with MT4 and MT5 shanks and arbor diameters of ¾", 1", 1-1/4" and 1-1/2".
Click for more |
|
|
|
|
Shell Reamer Arbors |
|
|
|
|
|
|
Toolmex Shell Reamer Arbors Are Available In Tapered Or Straight Shank Models.
Toolmex Shell Reamer Arbors are made of alloy steel and hardened to Rc 56~60 for long lasting durability. All models are precision-tested and certified to a .0004" T.I.R. maximum. Available with MT1, MT2, MT3, MT4 and MT5 shanks or straight shanks ranging from 5/8" to 1-3/8". Click for more |
|
|
Taper Sleeves |
|
|
|
|
|
|
Toolmex Taper Sleeves Ensure Maximum Accuracy for Industrial Applications.
Toolmex Taper Sleeves are made of alloy forged steel and hardened to Rc 56~60 for long lasting durability. The extension socket sleeve is soft with hardened tang only and ground throughout to ensure maximum accuracy. All models are crafted to a T.I.R.of less than .0004". Click for more |
|
|
|
|
End Mill Holders |
|
|
|
|
|
|
Toolmex End Mill Holders Are Ideal For A Variety Of End Mill Shanks.
Toolmex End Mill Holders are made of alloy steel and hardened to Rc 56~60 for long lasting durability. All models are crafted to a T.I.R.of less than .0004". Available in a variety of NST/NMTB and MT shanks, draw bar and tanged ends and sizes.
Click for more |
|
|
Extended Shell Mill Holders |
|
|
|
|
|
|
Toolmex Extended Shell Mill Arbors Are Precision-Crafted For Accuracy.
Toolmex Extended Shell Mill Arbors are made of alloy steel and hardened to Rc 56~60 for long lasting durability. All models are precision-tested and certified to a .0004" T.I.R. maximum. Available in NST/NMTB 40 and 50 shanks and arbor diameters ranging from 3/4" to 1-1/2".
Click for more |
|
|
|
|
Face Mill Holders |
|
|
|
|
|
|
Toolmex Face Mill Holders Are Precision-Crafted For Maximum Accuracy.
Toolmex Face Mill Holders are made ofalloy forged steel for long lasting durability and dependability. All models are crafted to a T.I.R. of less than .0004 inches and are designed to meet AT3 specifications for maximum spindle contact. Click for more |
|
|
Jacobs Taper Adapters |
|
|
|
|
|
|
Toolmex NST/NMTB Reducers Are Ideally Suited For Adapting To Smaller NST Sockets.
Toolmex NST/NMTB Reducers are made of alloy steel and hardened to Rc 56~60 for long lasting durability. All models are specially designed to accommodate smaller NST sockets when needed. These milling machine adapters are crafted to a taper seat T.I.R.of less than .0004". Click for more |
|
|
|
|
NST/NMTB Reducers |
|
|
|
|
|
|
92822 Toolmex NST/NMTB Reducers Are Ideally Suited For Adapting To Smaller NST Sockets.
Toolmex NST/NMTB Reducers are made of alloy steel and hardened to Rc 56~60 for long lasting durability. All models are specially designed to accommodate smaller NST sockets when needed. These milling machine adapters are crafted to a taper seat T.I.R.of less than .0004". Click for more |
|
|
Set Screws for NMTB End Mill Holders |
|
|
|
|
|
|
Toolmex Set Screws Are Ideal For NMTB End Mill Holders.
Toolmex Set Screws are made of alloy steel for long lasting durability and are available for a variety of shank types and thread dimensions, including NST, TMX and R8.
Click for more |
|
|
|
|
|
|
