| |
Expandable Sleeving |
 |
|
|
|
|
|
Expandable Sleeving- 1/8"
- This polyethylene terephthale is an ideal cover for outboard motor cables- marine hoses- trailer chains and harness assemblies
- UL file no. E107055; CSA file no. LR 66-145-1
- Use expandable tubing hot knife to cut expandable sleeving
Click for more |
|
|
|
|
Fabric Loom |
|
|
|
|
|
|
Fabric Loom- 3/16"
- Asphalt coated loom is constructed of a twisted paper and cotton-polyester blend weave
- Tubing is saturated with an asphalt compound to bind the weave and prevent moisture absorption
- Additionally- it is coated with a special flame retardant- black bituminous coating
- Ideal in Click for more
|
|
|
Flame Retardant Slit Loom (High Rise Ridge) |
|
|
|
|
|
|
Flame Retardant Loom- 1"
- This flame retardant slit loom is manufactured to meet the stringent requirements of the marine and emergency vehicle industries where extra protection is necessary. Click for more
|
|
|
|
|
High-temp Slit Loom |
|
|
|
|
|
|
High Temp Loom- 1/4"
- High temperature nylon slit loom was originally developed for ambulance and fire equipment manufacturers where the operation under a high heat environment is critical- but it is also used in many other industries where a high heat environment exists
- All high temperature slit loom is dist Click for more
|
|
|
Nylon Slotted Loom |
|
|
|
|
|
|
Nylon Slotted Loom- 1"
- This loom is perforated or has 3 rows of pre-drilled holes along its length.
- Perfect for applications which require the ability to drain moisture from groups of wires.
- Excellent for marine- construction or agricultural uses- or anywhere where high moisture is a concern. Click for more
|
|
|
|
|
Slit Loom |
|
|
|
|
|
|
Black Slit Loom- 1/4"
- Polyethylene slit loom has become one of the most popular conduits for holding groups of wires in position and protecting the wires against abrasion or crushing
- Contains a slit for easy insertion of wires over a long run; when bent or twisted the slit basically remains closed
- Al Click for more
|
|
|
Spiral Cut Loom |
|
|
|
|
|
|
Black Spiral Loom- 1/2"
- A spiral cut in this loom allows wires to stay in place- yet also be pulled out if needed
- Low density polyethylene material
- Temperature rating: -35
Click for more |
|
|
|
|
Colored Expandable Loom |
|
|
|
|
|
|
Blue Expandable Sleeving- 1/4"
- This polyethylene terephthale is an ideal cover for outboard motor cables- marine hoses- trailer chains and harness assemblies
- Expands up to 2 times the I.D. size. Click for more
|
|
|
Clear Vinyl Loom |
|
|
|
|
|
|
Clear Vinyl Loom- 3/16"
- Clear vinyl loom allows for visual inspection of wires
- Temperature rating to 140
Click for more |
|
|
|
|
Grey Plastic Loom |
|
|
|
|
|
|
Gray Plastic Loom- 1/4"
- Thin wall semi-rigid metallic grey polyethylene loom
- Temperature rating to 176
- Approx. wall thickness: .034"
Click for more |
|
|
Loom Clamps - Aluminum |
|
|
|
|
|
|
Aluminum Loom Clamps- 1/4"
- Aluminum loom clamps have a removable neoprene cushion- which helps cut vibration while protecting the loom or cables
- Typical applications include holding hydraulic hoses- wire harnesses and cables
- The mounting hole is 17/64" for 1/4" screw or bolts
Click for more |
|
|
|
|
Loom Clamps - Carbon Steel |
|
|
|
|
|
|
Carbon Steel Loom Clamp- 1/4"
- Carbon steel plated loom clamps with zinc/gold chromate
- Mounting hole is .406" for 3/8" stud
- Width of steel is 5/8"
- Removable EPDM jacket
Click for more |
|
|
Loom Clamps - Plated Steel |
|
|
|
|
|
|
Plated Steel Loom Clamp- 2-1/2"
- Plated steel loom clamps have a removable EPDM cushion- which helps cut vibration while protecting the loom or cables
- Typical applications include holding hydraulic hoses- wire harnesses and cables
- The mounting hole is 17/64" for 1/4" screw or bolt
Click for more |
|
|
|
|
Loom Clamps - Stainless Steel |
|
|
|
|
|
|
Stainless Steel Loom Clamp- 1/4"
- Stainless steel loom clamps have a removable EPDM cushion which helps cut vibration while protecting the loom or cables
- Typical applications include holding hydraulic hoses- wire harnesses and cables
- The mounting hole is 17/64" for 1/4" screw or bolt
Click for more |
|
|
Loom Clamps - Vinyl Coated Steel |
|
|
|
|
|
|
Vinyl Coated Loom Clamps- 1/4"
- Typical applications include holding hydraulic hoses- wire harnesses and cables
- The mounting hole is 17/64" for 1/4" screw or bolt
Click for more |
|
|
|
|
Loom Accessory Clips |
|
|
|
|
|
|
Accessory Clip- .35
- Use slit loom accessories to aid in routing wires
- Allows user to branch a portion of wires or to secure a section of wires to a stationary object
Click for more |
|
|
Strain Relief Cord Connectors |
|
|
|
|
|
|
1/2" NPT Locking Nut
- Liquid tight strain relief cord connectors have a unique design that has vibration proof protection (up to 70 psi) and an optimum seal
- Std MPT Thread & flex-type internationally approved: UL #E79903- CSA #LR50370-10- VDE #57986- SEV #100989
- Std PG Thread 6/6 Nylon w/ TPE gland. Click for more
|
|
|
|
|
|
|
