Special Features: Anodized aluminum adapter Dimensionally interchangeable with recirculating ball bushings Equipped with liner made from iglide® J Temperature range -40°F to +194°F JUI-01 (standard), JUI-20 (low clearance) *T500 liner optional for chemicals/high temps (up to 482°F for steel housing, 356°F for aluminum) Suitable shafting for iglide® J: DryLin® AWI aluminum, case-hardened, 300 series Best shafting for T500: hard-chrome and hard stainless steel

Special properties of the igubal® rod end bearings: Maintenance-free dry operation High stiffening Very high fatigue strength in varying loads Compensation of misalignments Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight

Special Features: The iglide® Clip2 bearing is a thin-walled bearing made from the iglide® M250 material and which has a beveled edge for extremely simple installations. The diagonal slit helps to compensate for poor housing bore tolerance as well as temperature and humidity changes. Split version of the iglide® M250 bearing Easy assembly by hand Compensation for heat expansion Suitable for ambient temperatures with high humidity Lightweight Very economical Inch and metric sizes available from stock Low bearing clearance, very accurate Maintenance-free and predictable service life

Sliding carriage with manually adjustable clearance Maintenance-free, dry operation Corrosion resistant Hard-anodized aluminum rails Standard bore pattern symmetrical C5 = C6

1" DryLin R Polymer Linear 4 bolt Flange Bearing Special Properties: Flange housing made from anodized aluminum, square flange Liner JUI-01 made from iglide® J Can be fitted with T500 liner material for temperatures up to 356°F Low clearance liners optional