Drum & Selector Switches

This is a shaft extender for A105,ML1,ML2 and ML3 series disconnect switches. This extender can easily be cut in the field for a perfect fit. There is also a sliding coupling for additional control. A shaft extender is required for a disconnect switch with a suffix beginning with S. For example ML1-25-SB3.

Springer Controls / MERZ A105-016-AR3E,16A, 3-Pole, Enclosed Disconnect Switch, Red/Yellow Springer Controls | MERZ Enclosed Disconnect Switches MERZ has long been the industry standard in UL certified disconnect switches. MERZ disconnect switches are second to none for quality and reliability. Springer Controls-MERZ Enclosed Disconnect Switches are available in models from 16 Amp to 125 Amp. These UL certified switches are suitable for residential and industrial applications. Each Springer Controls-MERZ disconnect switch is enclosed in a wall-mountable polycarbonate IP 65 rated ...

This is a normally open extra pole with current capacity consistent with the switches listed. This can be mounted on either side of a switch.

30mm Non Metallic, Non Illuminated, 2 Pos. Maintained, Knob Type Selector Switch 22 mm Non-Metallic Pushbuttons are heavy duty industrial control devices available with a wide range of Illuminated and Non-Illuminated Operators. The buttons are fully gasketed for Type 4X (IP65) protection. This is to prevent the entrance of water, oil, and dirt past the operator into the enclosure. The modular construction makes "on the job" assembly both fast and simple. The contact blocks are "stackable" (up to a maximum of 4 contact blocks) allowing many combinations of control layouts.