Hydraulic Motor Clamps

Heat treated 1/4"-28 UNF-3A plated steel T-bolts with plated steel locknuts A stainless steel welded liner closes the opening between clamp ends during tightening A smooth inner band prevents hoses from being cut or bulging and allows greater torquing capability than conventional worm gear clamps The band also assures equalized 360°clamping force around the hose for tight connections HC095 and HC100 do not have floating bridge

3/4" NPT Port Square head plug (PPM12) Square socket plug(PPM08 & PPM16)

200 PSI working pressure Flows up to 15 GPM for return and 5 GPM for suction line applications 3/4" NPT Ports Two 1/8" NPT Gage Ports

Recommended for Systems with less than 1,500 PSI without dynamic loads, Subject to moderate levels of shock and vibration

150 PSI working pressure Flows up to 90 GPM for return and 20 GPMfor suction line applications Both 1-1/2" NPT and 2" SAE Ports