Allpoints 261378 Sleeve - 7/16 Cct For Garland Range

Nat Pilot, W/Igniter W/ 48" Lead With 1/8" Female Push-On, 1/4" Cct Nut & Sleeve Fits Models 24rrg, 36rrg, 48rrg, 60rrg, 9000re, 924re, 924rx, 936re, 936re-Ch1, 936rx, 948re, 948re-Ch1, 948re-Chdl1, 948rx, 960re, 960rx, 972re, 972rx, Conv Oven, Fhb1, Fhb1f, Fhbi1, Fhbi1f, Fhbio, Fhbio1, Fhbo, Fhbo1, Hb1, Hb1c, Hb1f, Hb1fc, Hb2, Hbi1, Hbi1c, Hbi1f, Hbi1fc, Hbi2, Msa24, Msa36, Msa48, Msa60, Msa72, Oven Std Ignit, Std Oven, V1g12m, V1g12s, V1g24m, V1g24s, V212m, V212s, V218m, V218s, V2h36, V2h36c, V2h36m, V2h36s, V3036, V3036c, V3036m, V3036s, V3g36, V3g36c, V3g36m, V3g36s, V424m, V424s, ...

Nat/Lp Pilot, Factory # 1810-100, Tube Size 3/16a" & 1/4", Flame Pattern Standard, Has 3/16 X 1/4 Nut & Sleeve, 1/4" Nut & Sleeve, To Be Used With A Thermocouple. Lp Orifice, .010, A1098, M-138, # 261554 Nat Orifice, .016, A1100, M-275, # 261556

High Temperature Fiberglass Sleeving, 5/16" Sleeving, 100 Ft Roll Use 85-1157, Rated For 464 F Sold By The Foot # 85-1164

1/4" Pilot Conversion Kit. Special Compression Nut & Ferrule. Converts 1/4" Pilots To 3/16" Tubing. Used For Series 1830 Pilots. Consists Of: 3/16" Pilot Ferrule, Which Is Extra Long, # 40-047, And Pilot Nut Has Threading To Fit 1/4" Pilots And Has 3/16" Hole, # 10-218. Sleeve Part #:951079

Corrugated Stainless Steel Flex Tube Kit, For Gas Supply And Pilot Lines. Includes: 1 Flex Tube, 1/4" X 30" 2 Compression Nuts 2 Compression Sleeves (Ferrules) 1 Male Breakaway Fitting ( Male Nut/Sleeve ) Instructions Can Be Used With Pilot Head Tip # 51-1036 Vulcan