JET® Cllr Assy 600-C2-C3, WL9-2904500

The genuine Wilton part number WL9-2907600 Pipe Jaw Assembly, is sold for the combination vises listed below. When the old pipe jaws wear out or if you just need a set they just bolt on.You know r=that Wilton manufacturers quality products. For Use With: Jet C-3 (Before 1984) Combination Pipe and Bench Vise C-3 (After 1984) Combination Pipe and Bench Vise C-3 (After 1998) Combination Pipe and Bench Vise

For Use With: Jet 656A Utility Vise

Washer dimensions are: OD is approx. 2" and ID is approx 1-1/4"rnrnRing dimensions are: OD is approx. 2-13/16" and is ID is approx 1-7/16"rnrnDistance between two screw hole centers is approx 2-3/8"rnrnScrews are appox. 5/8" long. For Use With: Jet 500 (After 1998) Machinist Vise 500 (Before 1998 Old) Machinist Vise 500 (Before 1998 New) Machinist Vise 1780A (After 1998) Tradesman Vise 1780 (Before 1998) Tradesman Vise 2080 (Before 1998) Tradesman Vise

For Use With: Jet 204-1/2M3 Combination Pipe and Bench Vise 204-1/2M2 Combination Pipe and Bench Vise 504-12M3 Machinist Vise 504M3 Machinist Vise 604-12M3 Machinist Vise 604M3 Machinist Vise

For Use With: Jet C-0 (Before 1998 Old) Combination Pipe and Bench Vise C-0 (Before 1998 New) Combination Pipe and Bench Vise AW-35 (Before 1998) Combination Pipe and Bench Vise C-0 (After 1998) Combination Pipe and Bench Vise AW-35 (After 1998) Combination Pipe and Bench Vise 350 (After 1998) Machinist Vise 350 (Before 1998 New) Machinist Vise 744 (1960-1975) Mechanics Vise 744 (1975-1979) Mechanics Vise 744 (1980) Mechanics Vise 1745 (After 1998) Tradesman Vise 1740 (Before 1993) Tradesman Vise 1740 (After 1993) Tradesman Vise 2040 (Before 1993) Tradesman Vise 2040 (After 1993) ...