JET® Bearing Thrust Cllr 1280, WL9-1500351

This authentic replacement item is designed for use with Wilton vise. This nut helps to secure spindle handle assembly and allows user to tighten or loosen vise grip. This assembly includes a metal but, bolt and a washer. Please note you would need a wrench installing/removing this item. For Use With: Jet 415 Mechanics Vise 656A Utility Vise 676 Utility Vise

Washer dimensions are: OD is approx. 2" and ID is approx 1-1/4"rnrnRing dimensions are: OD is approx. 2-13/16" and is ID is approx 1-7/16"rnrnDistance between two screw hole centers is approx 2-3/8"rnrnScrews are appox. 5/8" long. For Use With: Jet 500 (After 1998) Machinist Vise 500 (Before 1998 Old) Machinist Vise 500 (Before 1998 New) Machinist Vise 1780A (After 1998) Tradesman Vise 1780 (Before 1998) Tradesman Vise 2080 (Before 1998) Tradesman Vise

Ring inner diameter is approx. 2"rnrnOuter ring diameter is approx. 3"rnrnThe washer inner diameter is approx 1-3/4"rnrnOuter Diameter is approx. 1-15/16"rnrnScrew holes are approx 3/16" For Use With: Jet C-2 (Before 1998) Combination Pipe and Bench Vise C-3 (Before 1984) Combination Pipe and Bench Vise C-3 (After 1984) Combination Pipe and Bench Vise C-2 (After 1998) Combination Pipe and Bench Vise C-3 (After 1998) Combination Pipe and Bench Vise 600 (After 1998) Machinist Vise 600 (Before 1998 ) Machinist Vise

For Use With: Jet 204-1/2M3 Combination Pipe and Bench Vise 204-1/2M2 Combination Pipe and Bench Vise 504-12M3 Machinist Vise 504M3 Machinist Vise 604-12M3 Machinist Vise 604M3 Machinist Vise

The Wilton® ATV All-Terrain Vise™ Locking Hitch Pin is chrome-plated for corrosion resistance. This locking pin fits a standard 2-inch trailer hitch.