General Wire G-CW Coupling Wrench W/ G-Connector

General Pipe Cleaners Electric Floor Model Machine w/ Power Feed, 100' x 3/4" Cable & Cutter Set The Speedrooter 92 has root cutting power plus the ability to do small drain work. For smaller lines, you switch to a drum that holds 1/2" cable (available separately), a job that takes less than a minute. Just loosen three knobs, swing the motor to the side, and lift off the drum. The power cable feed drives 3/4", 5/8", and 1/2" cables and has the pulling power to get your cable out of the line even on long, tough jobs. To adjust for 3/4" or 5/8" cables, you simply turn the knob on top of the ...

General Pipe Cleaners Electric Floor Model Machine w/ Power Feed, 100'x3/4" Cable & Cutter Set The Maxi-Rooter combines root cutting power and big capacity in a surprisingly portable machine. A heavy-duty 3/4 hp motor with capacitor start and over-load protection drives a drum that can hold 125 ft. of 3/4" cable or 150 ft. of 5/8" cable. The frame is a tough aluminum alloy. Look at the portability that goes with that power and capacity. The Maxi-Rooter rolls on 10" ball-bearing semi-pneumatic wheels and has V-belt stair climbers for easier transport up and down stairs. A truck loading ...

General Pipe Cleaners Electric Machine w/ Power Feed & 50'x5/16" Cable, Cutter Set Equipped with a variable speed power cable feed and variable speed motor, the Drain-Rooter PH makes drain cleaning jobs cleaner and easier. The Drain-Rooter PH feeds and retrieves the cable at up to 16 feet per minute. A four-foot guide hose eliminates cable whipping, dirty fixtures, and messy floors. The guide tube doubles as a feed control. It allows operator to feed or retrieve the cable with a simple flick of the wrist. The drum speed can be varied by changing the pressure on the foot pedal, making it ...

General Pipe Cleaners Sectional w/ (10) 10'x1-1/4" Proflex Cables w/ G Connector, Cable Feeding Tool & Cutter Set This machine is almost as easy to run as a lawn mower. You push eight foot (available separately) or ten foot (included with this package) cable sections into the line until you reach some resistance. Then attach the rear cable coupling to the machine, stand behind it, and turn it on. Watch the cable feed itself into the line. When a section has run into the drain, attach another one and keep going. This self-feeding feature also works to pull sections out of the line. The ...

General Pipe Cleaners 5 Piece Cutter Set for 5/8" & 3/4" Cables Used with The Metro Machine (SHD) Spear Head - Starting Drill. (2UC) 2" U-Cutter - For cutting and scraping. (3HDSC) 3" Heavy Duty Side Cutters. (3HDB) 3" Heavy Duty Saw Blades - For roots and other stoppages. (RTR-2) Corkscrew Retrieving Tool - For removing loose objects.