US Motors Hostile Duty TEFC, 15 HP, 3-Phase, 1775 RPM Motor, HD15P2E

Some general purpose applications require a motor that runs on 200 volt power. These 200 volt motors are stocked from 1 Hp to 50 Hp in TEFC, and 1 Hp to 100 Hp in ODP. Also available is an extensive line of 575 volt motors. The 575 volt motors are available in general purpose TEFC and ODP, Washdown, Severe Duty, IEEE-841, Explosion Proof, and Close-Coupled pump designs, in a variety of mounting configurations. Features Heavy duty frames Ball bearings Moisture resistant ISR® (Inverter Spike Resistant) copper windings Low-loss electrical lamination grade steel Three year warranty ...

Baldor-Reliance 50 Hertz Motor, KM3454-57, 3 PH, 0.25 IP44 HP, 1425 RPM, 230/400 Volts, TEFC, 56C Frame Some applications require NEMA motors which operate on true 50 Hz power. Where this 50 Hz power is all that is available, these NEMA motors are designed to be used at rated voltages with tolerance of ± 15% on voltage.

Baldor-Reliance's extensive line of General Purpose motors are available in Open Drip-proof and TEFC construction in both single and three phase. Horsepower sizes available from stock range from 1/12 HP through 1500 HP. Designed for General purpose use means that these motors can be used in applications which include compressors, pumps, fans, conveyors, material handling, machine tools and many others. Features Pressure cast aluminum end plates with ribbed design for rigidity Ball bearings Locked drive end bearing Heavy gauge steel frame Super-E motors have NEMA Premium efficiency 3 year ...

Baldor-Reliance 50 Hertz Motor, VM3541-57, 3 PH, 0.75 IP44 HP, 2850 RPM, 230/400 Volts, TEFC, 56C Frame Some applications require NEMA motors which operate on true 50 Hz power. Where this 50 Hz power is all that is available, these NEMA motors are designed to be used at rated voltages with tolerance of ± 15% on voltage.

Baldor-Reliance 3-Phase Motor, VEM2333T-5, 15 HP, 1765 RPM, 254TC Frame, C-Face Mount, TEFC, 575 Volts Some general purpose applications require a motor that runs on 200 volt power. These 200 volt motors are stocked from 1 Hp to 50 Hp in TEFC, and 1 Hp to 100 Hp in ODP. Also available is an extensive line of 575 volt motors. The 575 volt motors are available in general purpose TEFC and ODP, Washdown, Severe Duty, IEEE-841, Explosion Proof, and Close-Coupled pump designs, in a variety of mounting configurations. Features Heavy gauge steel and cast iron frames Ball bearings ISR® (Inverter ...