Hytrol® Stationary Floor Support MS-7-18 - 18"W - Max. Leg 45-5/8"H

PERMANENT LEG SUPPORT FOR Omni Metalcraft 24" BETWEEN FRAME WIDTH BALL TRANSFER TABLES Heavy-duty galvanized steel channel construction offers permanent Ball Transfer Conveyor support. Height adjustable legs and pivot plate mounts for greater flexibility, and may be bolted to floor.

Standard specifications include: BED - 6-5/8" deep x 12 ga. formed steel Slider Bed is powder coat painted. Reinforced with 3/4" pipe which forms sockets for guard rails. BELT - Ultimate 140BBS - Nitrile Belt END DRIVE - Located on discharge end of conveyor, chain guard on left hand side. DRIVE PULLEY - 8" dia. with 1-3/16" dia. shaft at bearings, machine crowned and fully lagged. TAIL PULLEY - 6" dia. with 1-3/16" dia. shaft at bearings, machine crowned. SNUB IDLER - Adjustable 2-1/8" dia. for tail end; 2-1/2" dia. for drive end. Pre-lubricated ball bearings. Guards included. RETURN ...

The 4BH30 model support is a 3,000 pound capacity Hstand which may be used with Ashland Conveyor 4" channel frames, not for use with 2-1/2" and 3-1/2" frames. The Hstand is floor mounted for permanent installations as opposed to tripods which are portable. Upper and lower legs are constructed of 11 ga steel. Single legs are available for applications such as curves. Assembly required.

The LP25 model support is a 2,500 pound (per pair) capacity Hstand which may be used with Ashland Conveyor 2-1/2", 3-1/2", and 4" frames. The Hstand is floor mounted for permanent installations as opposed to tripods which are portable. Upper and lower legs are constructed of 12 ga steel and 11 ga steel. As these do not contain a crossbrace they are not BF dependent. Sold in pairs, assembly required.

Pallet Track Kit with 2 Staggered Skate Wheel lanes is ideal for fast-moving SKU's picked straight from the pallet. 96" long x 38" overall width. Track includes front ramp stops, fixed angle rear end stops, mid and rear floor supports. Pallet Track Features & Benefits: Creates a "First-In-First-Out" (FIFO) storage system. Product is loaded from the rear and removed from the front. Can be floor mounted or supported by pallet rack beams Increases storage density & efficiency Reduces fork truck operations, labor costs & damage Green - uses no energy consumption Wheel Track Features & ...