JET® Key Gh-1340W 3Mm X 8Mm, CM9-GB1096-79

For Use With: Jet J-1230R (320036) Radial Arm Drill Press J-1230R (320036) Radial Arm Drill Press J-1230R-4 (320036) Radial Arm Drill Press J-1230R-4 (320036) Radial Arm Drill Press J-1230-4 (320037) Radial Arm Drill Press J-1230-4 (320037) Radial Arm Drill Press 1230R Drill Press 1230R Drill Press

For Use With: Jet J-7015 (414450) 8-in x 13-in Horizontal Cut-Off Bandsaw J-7015 (414450) 8-in x 13-in Horizontal Cut-Off Bandsaw 7015 Horizontal Cut-Off Band Saw 7015 Horizontal Cut-Off Band Saw

This is an authentic Jet replacement part that has been sourced from the original manufacturer to be used with planers/molders. The metal key is part of the gear case assembly and is used to interlock a rotating shaft and gear. This item is available as an individual replacement part, please see illustrated diagram for associative parts. For Use With: Jet JPM-13 (708526) Planer / Molder JPM-13CS (708524) Planer / Molder

For Use With: Jet J-2232AC (354214) 20-in. Variable Speed Drill Press J-2232AC (354214) 20-in. Variable Speed Drill Press J-2234AC (354216) 20-in. Variable Speed Drill Press J-2234AC (354216) 20-in. Variable Speed Drill Press 2223VS Drill Press 2223VS Drill Press 2232AC Drill Press 2232AC Drill Press 2234AC Drill Press 2234AC Drill Press

This is a genuine part which is supplied directly from the original manufacturer. It is specially made for use with Jet band saws. The purpose of this hardware is to secure the pulley on the shaft. It provides an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to the owners manual and the diagrams of your model for the exact location and the correct installation of this part. One durable metal key is included. To replace it you will need a screwdriver set. Remove the belt cover, remove the pulley and replace the key in the ...