Sealer Sales W Series 18" Direct Heat Foot Sealer, PTFE Coated Serrated Seal, 15mm Seal Width

Our AVP Series Heat Sealers were designed for heavy duty applications. The most evident feature of the AVP units are the lack of visible controls. Form follows function providing an expansive work surface to hold product ready to be sealed. External compressor required (6CFM@100PSI) Side mounted heat and cool timers fitted to a powder coated steel chassis regulate seal parameters that are critical to obtaining airtight and watertight seals. A one-tap steel encased footswitch provides hands free operation. Like the AVN, AVS and CAV units, the AVP units will not fire an impulse until ...

The heat sealer is ideal for sealing small, irregular or extra long packages. Constructed with a high impact ABS thermal casting for heavy applications. A 5-15 min warm-up time is needed. Easy to Operate: Depending on the material, allow 5-15 min of warm-up time for the sealer to reach the desired temperature. Just insert the material between the jaws and close the jaws for a few seconds. Release the jaw, and increase or decrease the timing until a satisfactory seal is obtained.

Our KF-Series foot sealers are ideal for high volume poly bag and other thermoplastic sealing. The sealers are capable of sealing 15-20 bags per minute. These sealers allow you to keep both hands free for quicker and more accurate sealing. The machines are also equipped with a plug-in timer. The timer controls the sealing time needed for different materials. Once the timer is set, it will give a consistently flat seal. When the seal is done, the signal light on the timer will turn off. The sealers include a 26" pedestal, a 2" base, an adjustable worktable and an adjustable foot control. ...

The KF-200CS is portable direct heat sealer that is lightweight and easy to use anywhere. KF-sealers are ideal for sealing small, irregular, or extra long packages. It is recommended to use this sealer if you are sealing cellophane, coated aluminum foil, kraft paper and other thicker materials. Equipped with an adjustable temperature controller allows the user to control the amount of heat needed for different material types. A 5-15 min warm-up time is required to achieve the correct temperature. The sealer is constructed of durable metal with insulated rubber handgrips. Also included ...

The W-series double foot sealers are ideal for sealing thicker materials. Available in 12", 18" and 24" lengths with a 5mm seal, the W-series foot sealers are capable of sealing materials up to 20 mil total thickness. Equipped with a single and double sealing selector switch provides the flexibility of sealing various types of materials. Depending on the thickness of the material, the user has the choice of 1 or 2 elements for top and bottom heating. sealers are equipped with a steel frame for added safety and stability. A height adjustable working plate is also included. The ...