Motion Sensors

All-digital dual technology sensor - ultrasonic and passive infrared (PIR), dual relay, IntelliDAPT® self-adaptive technology—no manual adjustment required, 1000 square foot coverage area, High-impact injection molded white plastic casing, Mounts to single-gang NEMA-style switch box, decorator wall plate sold separately, Line voltage 120/277VAC; 50/60 Hz, Operating temperature: 32° to 104°F (0° to 40°C)

All-digital passive infrared (PIR) sensor, single relay, IntelliDAPT® self-adaptive technology—no manual adjustment required, 1000 square foot coverage area, High-impact injection molded white plastic casing, Mounts to single-gang NEMA-style switch box, decorator wall plate sold separately, Line voltage 120/277VAC; 50/60 Hz, Operating temperature: 32° to 104°F (0° to 40°C)

All-digital dual technology sensor - ultrasonic and passive infrared (PIR), Non-volatile memory for sensor settings, IntelliDAPT® self-adaptive technology—no manual adjustment required, 2000 square foot coverage area, Rugged, high-impact injection molded off-white plastic casing, Recommended mounting height 8 to 12 feet, Line voltage 100-277VAC; 50/60 Hz, Operating temperature: 32° to 104°F (0° to 40°C)

Intended Use: High Bay 360° Sensor Features: PIR Occupancy Detection, 360° Coverage, Up to 45 ft mounting, No minimum load requirement, Self-Contained Relay - No Power Pack needed, Adjustable Time Delay, 100 Hr Lamp Burn-in Timer, Green LED Indicator Listings: UL and CUL Listed Construction: The CMRB 6 sensor mounts directly to the end of a lighting fixture through an extended 1/2 inch chase nipple, and is ideal for individual on/off control of T5/T8 fluorescent lighting. Optics: PIR Occupancy Detection Electrical: The sensor is line powered and can switch line voltage. ...

Levitons ODS10, Decora wall switch passive infrared (PIR) occupancy sensor is used to provide automatic lighting control for energy savings and convenience in a variety of commercial applications, including: small offices, storage areas, copier rooms, and closests. The ODS10-ID can be used for 120V or 277VAC incandescent, low-voltage and fluorescent lighting with either electronic or magnetic ballasts. Delayed-OFF time settings: 10, 20 and 30 minutes with 30-second test mode. Photocell with ambient light override prevents these devices from switching lights ON when there is ample natural ...