Electrical Wire & Cable

Southwire 67807102 NM-B-PCS 14/2 G 16/2 PEGY 1000R, ROMEX® SIMpull® NM-B-PCS DUO™ CABLE, 1000' Southwire® Romex® Brand SIMpull® NM-B-PCS DUO™ nonmetallic-sheathed cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the National Electrical Code. NM-B-PCS cable is primarily used in residential wiring for SMART home applications such as 0-10V DC dimming controls for LED lighting. NM-B-PCS cable may be run in air voids of masonry block or tile walls where such ...

16-19 CU GPT PRIMARY AUTO WIRE RED Applications Southwire's GPT is suitable for use as low voltage primary wire intended for use at nominal system voltages of 60 volts DC(25 volts AC) or less in surface vehicle electrical systmes. Type GPT is ideal for nominal applications with limited exposure to fluids and physical abuse experienced during the operation of cars, boats, trucks, buses, tractors, trailers, etc. Specifications SAE International Surface Vehicle Standard J-1128. Construction Southwire's GPT is manufactured using fully annealed stranded bare copper conductors with ...

Features: Leadhead Offset Two Post Hole 1/16" post hole (.937", 24 mm) Full construction details shown on previous page Fine stranded copper conductor, tin plated, for maximum conductivity, flexibility and corrosion resistance Premade lengths listed here Colorcoded for easy polarity identification Custom cables, any length, gauge, etc., can be made to your specifications

Southwire 67962901 NM-B-PCS 12/3 G 16/2 PEGY 200C, ROMEX® SIMpull® NM-B-PCS DUO™ CABLE, 200' Southwire® Romex® Brand SIMpull® NM-B-PCS DUO™ nonmetallic-sheathed cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90°C (with ampacity limited to that for 60°C conductors) as specified in the National Electrical Code. NM-B-PCS cable is primarily used in residential wiring for SMART home applications such as 0-10V DC dimming controls for LED lighting. NM-B-PCS cable may be run in air voids of masonry block or tile walls where such walls ...

Features: Leadhead Universal A straightstyle leadhead, specially designed to be burned onto intercell connectors Reduce inventory of cables but maintain high levels of coverage Available in 60" and 120" premolded lengths Use with intercells or other leadheads Fine stranded copper conductor, tin plated, for maximum conductivity, flexibility and corrosion resistance Red or Black insulation Allows you to locate Negative and Positive cables more conveniently for applications Use our Leadhead post mold to make your power takeoffs when burning on universal Leadheads Shrouds, see page 53