Grinders & Buffers

The Series 57 tool post grinders offer a complete range of spindles to accommodate a wide range of tool room and production line needs. Belt and pulley combinations provide nine different spindle speeds. The coil spring applies constant tension to compensate for belt stretch, assuring proper alignment and vibration-free grinding. The Series 57 grinders are designed for lathes with 9" to 20" of swing. The interchangeable spindles allow easy change over between internal and external grinding applications. Changeovers are achieved by removing an insert and replacing it with another insert. ...

Dake 961001 G-75 3" x 79" Belt Grinder specify 220v-3 ph Belt Grinder 6,600 fpm grinding speed for maximum grinding efficiency. Features: Pivots up and down on the base for easy ergonomic work height adjustments Hinged top cover opens for access to grind large pieces using the entire length of the belt Advanced belt tracking with vented front wheel fixed in place for rigidity when grinding on the wheel radius Adjustable parts rest and backing plate with Plexiglas shield to keep the part being ground steady and in place

Baldor-Reliance Grinders/Buffer, 35M 4P GRINDER Features: 14 inch heavy duty Arbor 1 1/4 accommodates 3 wide wheels Wheel guards are cast iron, exhaust type All units 50/60 hertz, 1800 idle rpm Three phase Manual starter Furnished with lighted eyeshields Designed to comply with OSHA standards under normal usage Typical Applications: Used for Heavy duty grinding applications. Specifically for foundry and fabrication shop use. Grinds castings, weldments and prepares parts for welding. The motor is rated 5 horsepower or 7.5 horsepower with 14 diameter x 3 wide wheels. Handles large pieces ...

All-Around versatility is available from a grinder that can handle up 3 inch wheels for external grinding and six speeds - variable by pulley changes. Built-in spindle handles internal grinding down to 1/8 inch diameter with collet chuck and mounted wheels. A 2 inch adaptor arbor is included for deeper internal grinds with ¼ inch bore grinding wheels. Includes Dumore built ¼ HP universal motor, automatic spring tension belt adjustment for easier alignment, and a handy carrying case. This unit is designed for use with lathes having 8 inch to 14 inch swing. Center line of spindle to ...

Baldor-Reliance Grinders/Buffer, 24C 2P GRNDR-BUFFER Features: Two wheels 8x1x3/4 Wheel guards and tool rests are cast iron Guards are exhaust type Designed to comply with OSHA standards under normal usage Typical Applications: General purpose grinding (36 grit wheel). Wire brush is used to remove scale and rust. Deburs large objects. 3/4 horsepower motor is suitable for heavy grinding.