Desiccators

Extra-large Scienceware®desiccator cabinet provides a low humidity, dust free environment for several large containers or a lot more small ones! Clear on all sides for quick visualization of desiccator contents Rugged copolyester side and top panels and apolycarbonate door and rear panel for long life Includes two gas port fittings with stopcock valves located on back panel to utilize a dry gas of your choice as desiccant Pull-out, perforated acrylic shelves (2 included) allow maximum air circulation and have built-in stops to prevent accidental tipping; maximum weight per shelf: 10lbs ...

Shuter Parts Cabinet (20) compartment is economically priced storage solution for small parts in the shop, assembly, office, garage and home use. Cabinet constructed with polystyrene. Cabinets can be mounted on a wall or stacked with other Shuter Parts cabinets. Removable plastic drawers 2.6"W x 5.75" D x 1.5" H include drawer divider to increase storage capacity. 20 Bin Part cabinet weight capacity = 130lbs . Unique drawer labeling allows barcode technology to be used for inventory control and location identification. Ideal for Parts storage, component storage, service centers, shops, ...

The attractive design and sturdy construction of the Secador®line of desiccator cabinets assures easy and reliable dry storage of moisture and UV sensitive products. U.S. Patents: 6,834,920; 7,318,630 and D474,626. Durastar®co-polyester construction blocks 99% of UV light and is resistant to staining, crazing and chemical attack Large door maximizes access to interior space and has a patented seal design, tab latches and security loops for a padlock or tamper-evident seals; opens top to bottom Includes built-in suitcase style carrying handle and two removable shelves Perforated ...

Space Saver Desiccators will hold a full vacuum (29.9" Hg 75.9cm) at room temperature for 24 hours and remain airtight even if not under vacuum. A polypropylene stopcock with PTFE plug accepts 6.4mm (1/4") I.D. tubing and allows a controlled entrance of air preventing unnecessary turbulence. The flat-top dome maximizes interior space while a neoprene O-ring assures a tight seal down to 0°C without the need for grease (ring will not be harmed if grease is used.) All models include a 0.32 cm (1/8") thick perforated plate.

The small size of this desiccator allows quick vacuum creation for rapid, repeated degassing of multiple samples. Vacuum rating of 740mm Hg (29") Clear polycarbonate top for easy viewing of contents; white polypropylene bottom Stopcock with 2mm Teflon®PTFE plug accepts tubing with ¼" to ⅜" I.D. Peripheral flange around the bottom fits into two snap locks and seals the two halves against a Buna-N O-ringTEFLON®is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.