Drain Strainers

Solvent weld over 2" Sch. 40 DWV pipe. Universal 4-1/4" Snap-Tite Strainer. Drain body is sealed to shower base with rubber gasket and fiber slip washer.

A typical Zurn Floor Drain can be installed in most floor construction. The drain pipe is run to an elevation below the expected finished floor level, so that the drain top will be flush with (or slightly below) the finished floor. The drain body is secured to the pipe with any of four connections -threaded, no-hub, inside caulk, or the Zurn Neo-Loc.

Features: Theft-resistant, brass stopper Metal strainer body, 1-1/4" deep Metal overflow plate, 3-3/8" wide Designed for heavy-duty use in hotels, motels, andrental property Replaceable, drip-proof Buna-N-Seal Adapter bar for changing from two to one-hole Patents: U.S. Patent No. 4,720,877 Operation: Push down to close. Pull to open. No stopperrotation required.

For repairing wobbly toilets or loose closet flanges without replacing the floor. Includes two heavy gauge pre-slotted flange plates, six floor attaching screws and 4 large flathead flange assembly screws.Use for holes cut too large, rotting floors or screws that pulled loose. Easy-to-use floor and flange support.

Watco 38321-CP Push Pull® Tub Closure 1-5/8" - 16 Thread W/Bushing Adapter, Chrome Plated Features: Theft-resistant, brass stopper Metal strainer body, 1-1/4" deep Designed for heavy-duty use in hotels, motels,and rental property Replaceable, drip-proof Buna-N-Seal With included 38103 bushing, 1-13/16" O.D. - 16 Approvals: IAPMO, SBCCI, CSA Patents: U.S. Pat. No. 4720877 Canadian Patents 1246302 and 1253654 Operation: Push down to close. Pull to open. No stopperrotation required. Thread Size: Actual thread size 1-5/8" O.D. - 16