80/20 3312 Roll-In T-Nut W/Set Screw, 1/16"

The single tab wing clip is commonly used with a button head socket cap screw to create custom end fastener assemblies. The winged tab of the clip prevents the mating profile from rotating. An end fastener connection method requires two machining services; an end tap on the mounting profile and an access hole in the mating profile in order to reach the screw head.

The milling connector provides a strong, internal fastening method that requires no profile machining. It allows infinite positioning along the mating profile and can be used even when the mating profile end is captivated. The point of the set screw bites into the bottom of the T-slot profile, making it a secure connection. The milling connector can be used in pairs.

The F-SF81 is a 1 inch countersunk head screw typically used to install deckings and surfaces on Flexpipe structures. It can be used for assembling HDPE box drawers as well as fixing surfaces that may need to be fixed directly on to the pipe, therefore requiring a metal screw.

The roll-in T-nut with flex handle is a fastening option that loads from either the profile ends or side, which is helpful in applications where the ends are inaccessible. The flex handle sticks out past the profile to make it easy to position and move within the T-slot. It is available with options in size, material, thread, and finish.

Features: Reinforce joints or roller connections No predrilling needed