JET® 4210 Drive Drum Shaft, JT9-5513045

JET offers woodworkers advanced sharpening features like torque adjustment for consistent pressure to the drive shaft, variable dial speed control that maintains outer wheel speed regardless of sharpening wheel diamter, and an oversized resevoir for better water management. The Jet Variable Speed Wet Sharpener provides a storage drawer for additional Included with the Variable Speed Wet Sharpener is a 220 grit 10 inch aluminum oxide grinding wheel, leather strop wheel, support arm, stone grader, straight edge jig, leather honing compound, angle measuring device and chisel angle jig. ...

For Use With: Jet J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw J-7020 (414472) 10"x16" Horizontal Bandsaw J-7020 (414472) 10"x16" Horizontal Bandsaw J-7040 (414478) 10"x16" Horizontal Bandsaw J-7040 (414478) 10"x16" Horizontal Bandsaw J-7060 (414476) 20"x20" Semi Automatic Horizontal Cut-Off Bandsaw J-7060 (414476) 20"x20" Semi Automatic Horizontal Cut-Off Bandsaw J-7040M (414475) 10X16 Inch Miter Cut Off Band Saw J-7040M (414475) 10X16 Inch Miter Cut Off Band Saw J-7040M (414475) 10X16 Inch ...

This is an authentic Jet replacement part that has been sourced from the original manufacturer to be used with planers/molders. The metal key is part of the gear case assembly and is used to interlock a rotating shaft and gear. This item is available as an individual replacement part, please see illustrated diagram for associative parts. For Use With: Jet JPM-13 (708526) Planer / Molder JPM-13CS (708524) Planer / Molder

This is a genuine part which is supplied directly from the original manufacturer. It is specially made for use with Jet band saws. The purpose of this hardware is to secure the pulley on the shaft. It provides an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to the owners manual and the diagrams of your model for the exact location and the correct installation of this part. One durable metal key is included. To replace it you will need a screwdriver set. Remove the belt cover, remove the pulley and replace the key in the ...

It is a genuine manufacturer-sourced component that is specially designed for use with Powermatic equipment. This screw set screw helps to secure the pulley to the arbor shaft. It is an identical replacement for a missing or a faulty part that was installed on a new unit, please make sure to check appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind it is a high-quality component which is made of durable metal and is sold individually. For Use With: Jet 3520A Wood Turning Lathe 66 10-Inch Table Saw 66 10-Inch Table Saw