JET® 7060 Guard Blade, JT9-5512329

Upper wheel sliding bracket for Wilton and JET band saws. Mounts upper wheel and adjusts to apply tension to blade. See model diagram for installation.

For Use With: Jet 8201 (9078171) 14-Inch Vertical Bandsaw 8201 (9078171) 14-Inch Vertical Bandsaw 8203 (9078171) 14-Inch Vertical Bandsaw 8203 (9078171) 14-Inch Vertical Bandsaw 8201VS (9078171) 14-Inch Vertical Bandsaw 8201VS (9078171) 14-Inch Vertical Bandsaw J-8201K (414500K) 14 Inch Vertical Band Saw J-8201K (414500K) 14 Inch Vertical Band Saw J-8203 (414504) 14 Inch Vertical Band Saw J-8203 (414504) 14 Inch Vertical Band Saw J-8201VS (414502) 14 Inch Vertical Band Saw J-8201VS (414502) 14 Inch Vertical Band Saw J-8203VS 14 Inch Vertical Band Saw J-8203VS 14 Inch Vertical Band Saw

It is a genuine item that is supplied by the original manufacturer for Powermatic helical cutterhead planers. This is the main belt which transfers the motion to the blade. Unfortunately, over time belts tend to wear out and stretch eventually requiring a replacement. Check the owner's manual and the appropriate diagrams for your model to ensure the correct repair. Keep in mind this high-quality belt is made of durable rubber and is sold as an individual item. For Use With: Jet 201 (1791261) 7.5 HP-1Ph 230V Helical Cutterhead Planer 201 (1791262) 7.5 HP-3Ph 230V Helical Cutterhead Planer ...

It is a genuine item that is supplied by the original manufacturer for use with Jet and Wilton bandsaws. This is the special center shaft that helps to secure the blade. It provides an identical replacement for a damaged or a missing component that was installed on a new unit. Ensure the correct installation of the new part by referring to the owners manual and the appropriate diagrams of your specific model. Note, this high-quality shaft is made of durable metal and is sold individually. For Use With: Jet J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw J-7020M (414474) 10"x16" Miter ...

This is an original Wilton replacement part. The blade seat is found in band saws. This part is made of metal, and is used to adjust the tension and position of the blade. You may require pliers or a punch when replacing this item. This part is sold individually. For Use With: Jet J-3410-2 (414455) 7x12 Cut-off Bandsaw J-3410-2 (414455) 7x12 Cut-off Bandsaw J-3410 (414454) 7x12 Cut-off Bandsaw J-3410 (414454) 7x12 Cut-off Bandsaw 3400 Bandsaw 3400 Bandsaw 3410 Bandsaw 3410 Bandsaw