JET® Blade Adjustment Pja-C53C 15 Planer, JT9-6284832

This is an authentic replacement part manufactured for use with verticle band saws. The special set screw is commonly used to secure the carbide blade guide to the support bracket. This set screw is available as an individual replacement part, please note two set screws may be required. For Use With: Jet 8201 (9078171) 14-Inch Vertical Bandsaw 8201 (9078171) 14-Inch Vertical Bandsaw 8203 (9078171) 14-Inch Vertical Bandsaw 8203 (9078171) 14-Inch Vertical Bandsaw 8201VS (9078171) 14-Inch Vertical Bandsaw 8201VS (9078171) 14-Inch Vertical Bandsaw J-8201K (414500K) 14 Inch Vertical Band Saw ...

It is a genuine item that is supplied by the original manufacturer for Powermatic helical cutterhead planers. This is the main belt which transfers the motion to the blade. Unfortunately, over time belts tend to wear out and stretch eventually requiring a replacement. Check the owner's manual and the appropriate diagrams for your model to ensure the correct repair. Keep in mind this high-quality belt is made of durable rubber and is sold as an individual item. For Use With: Jet 201 (1791261) 7.5 HP-1Ph 230V Helical Cutterhead Planer 201 (1791262) 7.5 HP-3Ph 230V Helical Cutterhead Planer ...

This is an original Jet-Wilton replacement part. The metal blade wheel is used in bandsaws to hold and turn the circular saw blade. You may want to replace both the front and rear blade wheels at the same time for even wear. If the blade wheels on your band saw have a tire, please be aware that the blade wheel does not come with the tire installed, so you may also want to purchase a new tire. You will need a hex or Allen wrench to replace this item. For Use With: Jet J-3410-2 (414455) 7x12 Cut-off Bandsaw J-3410-2 (414455) 7x12 Cut-off Bandsaw J-3410 (414454) 7x12 Cut-off Bandsaw J-3410 ...

This is an authentic Powermatic replacement part that is sourced from the original manufacturer to be used with miter saws. The spindle collar is used to disperse pressure put on the blade by the bolt across a wider surface area. This item is available as an individual replacement part, please see illustrated diagram for associative parts. For Use With: Jet 64A (1791227K) 10 in. w/30 in. Rails- 27 x 17 Extension Table Contractors Table Saw 64A (1791227K) 10 in. w/30 in. Rails- 27 x 17 Extension Table Contractors Table Saw 64A (1791228K) 10 in. w/50 in. Rails- 27 x 36 Extension Table and ...

This part is an OEM from the Jet manufacturer. The bearing pin is made for several bandsaw models. This metal pin assists with securing the right side blade guard assembly, and is sold individually. Keep in mind, the bearing pin is also included with the blade guard assembly (5710631A). A wrench and a screwdriver may be required for the replacement. For Use With: Jet J-3410-2 (414455) 7x12 Cut-off Bandsaw J-3410-2 (414455) 7x12 Cut-off Bandsaw J-3410 (414454) 7x12 Cut-off Bandsaw J-3410 (414454) 7x12 Cut-off Bandsaw HVBS-7MW (414459) Band Saw HVBS-7MW (414459) Band Saw 3400 Bandsaw 3400 ...