JET® Blade Guard Assy (Weldment) , WL9-2250087

The SN-F16-HN manual corner notcher is a high quality cast ironsheet metal notcherperfect for any garage or sheet metal shop. The cutting angle is fixed at 90 degrees and can notch up to 6" x 6" in one manual stroke. For your safety we have included a blade guard to save your fingers. Because of the high quality components used to make the SN-F16-HN, the finished notches are extremely clean and have burr free edges. The SN-F16-HN sheet metal notcher includes a sturdy floor stand, freeing up valuable worktop space. Take it off the stand and you have a machine that is very compact and can ...

For Use With: Jet 8201 (9078171) 14-Inch Vertical Bandsaw 8201 (9078171) 14-Inch Vertical Bandsaw 8203 (9078171) 14-Inch Vertical Bandsaw 8203 (9078171) 14-Inch Vertical Bandsaw 8201VS (9078171) 14-Inch Vertical Bandsaw 8201VS (9078171) 14-Inch Vertical Bandsaw J-8201K (414500K) 14 Inch Vertical Band Saw J-8201K (414500K) 14 Inch Vertical Band Saw J-8203 (414504) 14 Inch Vertical Band Saw J-8203 (414504) 14 Inch Vertical Band Saw J-8201VS (414502) 14 Inch Vertical Band Saw J-8201VS (414502) 14 Inch Vertical Band Saw J-8203VS 14 Inch Vertical Band Saw J-8203VS 14 Inch Vertical Band Saw

For Use With: Jet 3130 1 Phase Bandsaw 3130 1 Phase Bandsaw

For Use With: Jet 7060 (5511736) Semi Automatic Horizontal Bandsaw 7060 (5511736) Semi Automatic Horizontal Bandsaw

This is a genuine part that is supplied by the original manufacturer for use with Jet and Wilton vertical band saws. The blade allows you to cut with precision and is made of metal. Though the blade is sold individually, it is a common wear item so we recommend ordering a spare. Start by removing the blade guard, then press the blade locking pin and turn the blade until it can no longer move. Use an Allen wrench to remove the blade bolt and then the flange. Place the new blade in, replace the flange and bolt. Lower the guard mounting hardware and tighten the screw back into place. For Use ...