JET® Gear Shaft(Text) , JT9-7530

It is a genuine manufacturer-supplied part that is made for use with Jet and Wilton vertical bandsaws. The hinge-upper is a special component which helps to adjust the blade tracking. If the part is missing or is damaged, this will provide an identical replacement for the original part that was installed on a new unit. One durable metal hinge-upper is included. Check the owner's manual and the appropriate diagram for your model to ensure the proper repair procedure. A wrench set might be needed to remove the old component and secure the new one. For Use With: Jet 8201 (9078171) 14-Inch ...

For Use With: Jet J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw J-7020M (414474) 10"x16" Miter Cut-Off Bandsaw J-7020 (414472) 10"x16" Horizontal Bandsaw J-7020 (414472) 10"x16" Horizontal Bandsaw J-7040 (414478) 10"x16" Horizontal Bandsaw J-7040 (414478) 10"x16" Horizontal Bandsaw J-7060 (414476) 20"x20" Semi Automatic Horizontal Cut-Off Bandsaw J-7060 (414476) 20"x20" Semi Automatic Horizontal Cut-Off Bandsaw J-7040M (414475) 10X16 Inch Miter Cut Off Band Saw J-7040M (414475) 10X16 Inch Miter Cut Off Band Saw J-7040M (414475) 10X16 Inch ...

This is an authentic Powermatic replacement part that has been sourced from the original manufacturer to be used with table saws. The metal spacer is used to provide spacing between the bearing along the arbor shaft inside the bearing arm. This item is available as an individual replacement part. For Use With: Jet 66 10-Inch Table Saw 66 10-Inch Table Saw 68 12" Tilting Arbor Saw

The hex flange bearing connects to the steering shaft. This item is available as an individual replacement part. This part is an OEM from Troy-Bilt, MTD, Yard Man, and Cub Cadet for use in lawn tractors. It is made of metal and may require a wrench during installation. Over time this part may break or become stripped and will need to be replaced. For Use With: Jet GHB-1340A Metal Working Lathe

This is an authentic replacement part that is sourced from the original manufacturer for use with planers. The oil seal is commonly used to fill the space between the gear shaft and the gear box housing. This replacement part is available individually, please note two may be required. For Use With: Jet 209-1 (1791296) 5HP-1Ph 230V Planer 209HH-3 (1791316) 5HP-3Ph 230V/460V Planer 209-3 (1791297) 5HP-3Ph 230V/460V Planer 209HH-1 (1791315) 5HP-1Ph 230V Planer