General Wire 50HE1-A-DH 50'x5/16" Flexicore Cable w/ Down Head

General Pipe Cleaners Sectional w/ (10) 10'x1-1/4" Proflex Cables w/ G Connector, Cable Feeding Tool & Cutter Set This machine is almost as easy to run as a lawn mower. You push eight foot (available separately) or ten foot (included with this package) cable sections into the line until you reach some resistance. Then attach the rear cable coupling to the machine, stand behind it, and turn it on. Watch the cable feed itself into the line. When a section has run into the drain, attach another one and keep going. This self-feeding feature also works to pull sections out of the line. The ...

General Pipe Cleaners 3' Flexicore Closet Auger with Down Head The three foot Flexicore® Closet Auger is the ideal tool for breaking up stoppages or retrieving lost objects in clogged toilet bowls. It works where plungers fail. The patented Flexicore® cable is made from two layers of tempered spring wire wrapped tightly around a 49-stand wire rope center. It resists kinking and breaking yet has the right flexibility to get through low flow toilets. It's so tough, it's guaranteed for a full year. The optional down head works like a universal joint, following the bowl contours while ...

General Pipe Cleaners 3' Flexicore Closet Auger Guaranteed against manufacturing defects for a full year. This warranty includes damage to the cable, as well as the Closet Auger's other components. Two layers of tempered spring steel are coiled tightly over a core of 49-strand wire rope. It gives the tool tremendous resistance to kinking.

General Pipe Cleaners 8-1/2'x1-1/4" Proflex Cable w/ "L" Connectors Sections for Model 88 and Rodrunner come in the all purpose Flexichain which has a chain center, a stiffer Proflex which has a spring center, and a hollow style. Proflex is also available with a heavier duty 5/8" spring center. They snap together in a second and are taken apart quickly with a spanner wrench or uncoupling key.

When working under sinks or in other awkward places, the Power-VeeTM is like having an extra hand. Just squeeze the feed lever, and three offset rollers in the automatic feed grip the cable and drive it into the line. It's easy to use. To feed the cable, start the Power-Vee motor and squeeze the feed lever; to retract, reverse the motor and squeeze. The Power-Vee feeds 3/8" cable at 16 feet per minute. The Power-Vee handles 1/4" through 3/8" cables without any need for adjustment. Squeezing the feed lever brings the rollers into solid contact with the cable, with minimum effort by the ...