Hollow Wall Anchor - 1/8" x 2-1/2" - Phillips/Slotted Pan Head - Steel - Zinc, Pack of 100

The Wall Twister® is an all steel, single piece screw anchor manufactured with a unique deep cutting thread design, its suitable for fastening objects into drywall, wood, concrete, plaster, brick, and block walls. The patented reverse serrations under the head prevent over-torquing. When working with masonry-based materials, use the 3/16 carbide tipped drill bit included in the kit to create a pilot hole. When fastening into drywall or wood, no pre-drilling is required. Typical applications include HVAC fixtures, signs, telecommunications equipment, plumbing fixtures, and many more. It ...

Wall-Dog™ Screw Anchor, Light Duty, Oval Head, Short, Zinc The Wall-Dog™ is an all steel, one piece, threaded fastener, which is used to fasten various fixtures directly to drywall. Wall-Dog™ fasteners are fast. Unlike conventional screw anchors, which require the secondary step of threading a sheet metal screw into an anchor, the Wall-Dog™ is installed directly through the fixture into the drywall.

Zip-It® Wallboard Anchor, 3/8" - 1", Nylon, Master Ctn., No Screws The Zip-It® Anchor is a one piece self drilling anchor designed for use in hollow gypsum wallboard for light duty loads. It is available in both engineered nylon and Zamac alloy for use with either a No. 6 or No. 8 screws in 3/8" to 1" wallboard. The Zip-It® Jr., is formed from engineered nylon for use with No. 6 screws in 3/8" to 5/8" wallboard.

The Winged Plastic Anchor is manufactured via injection molding and is designed to be used in conjunction with a sheet metal or wood screw. It can be used in solid and hollow wall applications, and in concrete, block or brick. The anchor has a lip to prevent falling into deep holes or hollow walls and are not recommended for use overhead or in applications where holding values are critical.

Wall Grip Anchors, also known as Mollies or Molly Bolts, are made of carbon steel and manufactured and designed for use in hollow wall installations. When tightened, the body pulls up to enable the anchor to secure itself to thin walls such as paneling and hollow doors. These are length specific anchors. They are installed using the provided machine screw or with a special puller.