Metric Three Phase Motors

In applications where only single phase power is utilized, these motors are available from 1/12 Hp through 15 Hp in TEFC and ODP designs. Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless. These are also offered in 1/4 Hp through 5 Hp as Super-E® Premium Efficient motors where energy savings is desired. Features Ball bearing design 1-1/2 horsepower ratings are rated at 14 amps or less on 115 volts Manual thermal overload located in the conduit box UL and CSA recognized component approval 200°C copper windings Application(s) ...

Baldor-Reliance's extensive line of General Purpose motors are available in Open Drip-proof and TEFC construction in both single and three phase. Horsepower sizes available from stock range from 1/12 HP through 1500 HP. Designed for General purpose use means that these motors can be used in applications which include compressors, pumps, fans, conveyors, material handling, machine tools and many others. Features Pressure cast aluminum end plates with ribbed design for rigidity Ball bearings Locked drive end bearing Heavy gauge steel frame Application(s) Pumps, fans, conveyors, machine ...

Baldor-Reliance Motor, 3HP,1725RPM,1PH,60HZ,215,3735LC,TEFC,F1 Features: Heavy guage steel frames Ball bearings Base is seam welded to frame Snap Action starting switch for reliability Typical Applications: General purpose including compressors, pumps, fans, farm equipment, conveyors, material handling equipment, machine tools, etc.

Some general purpose applications require a motor that runs on 208-230/460 volt power. These motors range from 1 Hp to 50 Hp in TEFC. Also available is an extensive line of 575 volt motors. The 575 volt motors are available in general purpose TEFC and ODP, Washdown, Severe Duty, IEEE-841, Explosion Proof, and Close-Coupled pump designs, in a variety of mounting configurations. Features Heavy gauge steel and cast iron frames Ball bearings ISR® (Inverter Spike Resistant®) copper windings Low-loss electrical grade lamination steel Three year Warranty Application(s) Typical applications ...

Baldor-Reliance Motor, .13HP,1725RPM,3PH,60HZ,42,3313M,TEFC,F1 Features: Ball bearings Suitable for mounting any position Heavy gauge steel and cast iron frames Typical Applications: Pumps, compressors, fans, conveyors, machine tools and other applications where three phase power is available.