Nilfisk Floor Nozzle For Use With Attix 19, 30, & 50, Aluminum

Used in the process for cleaning out cattle and calves nostrils and mouths, this cabinet comes complete with a removable swivel hook, 6' of hose with fittings on each end and a special self-closing nozzle fitted with a 12" length of 3/8" stainless steel tube to reach the necessary areas. The bottom of the cabinet slopes to a 4" diameter drain located approximately 3" above the floor. The cabinet is 66" tall overall and is constructed of T-304 Stainless Steel.

This is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip around the perimeter pops out to provide a soft, non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled plate to contact the carpet, pulling air through the fiber to clean it. For use with Nilfisk Attix 30 and 50.

Cone Nozzle, 50mm (2"), Color Coded, FDA Approved, Blue, requires SL.0024.0000 (Aluminum Connector)or SL.0024.0011 (Stainless Steel Connector) to connect Tool to Hose

Includes 13' suction hose with 2" connection, anodized aluminum extension tube, alumnium floor nozzle, replacement rubber lips, plastic crevice nozzle, and aluminum coarse dirt nozzle. For use with: Nilfisk- Attix Series (30 & 50).

This is a combination tool with a top mounted lever to switch between carpets and bare floors. For bare floors a brush strip around the perimeter pops out to provide a soft, non-scratching brushing action. Notches along the front allow dirt to easily enter the nozzle. For carpets and rugs, the brush strip is recessed, allowing the channeled plate to contact the carpet, pulling air through the fiber to clean it. For use wtih Nilfisk UZ 964 and 934. ***Vacuum filtration bags are to be used with machines only, they are not to be repurposed for any other use.***