Wall Switches

Intended Use: High Bay 360° Sensor Features: PIR Occupancy Detection, 360° Coverage, Up to 45 ft mounting, No minimum load requirement, Self-Contained Relay - No Power Pack needed, Adjustable Time Delay, 100 Hr Lamp Burn-in Timer, Green LED Indicator Listings: UL and CUL Listed Construction: The CMRB 6 sensor mounts directly to the end of a lighting fixture through an extended 1/2 inch chase nipple, and is ideal for individual on/off control of T5/T8 fluorescent lighting. Optics: PIR Occupancy Detection Electrical: The sensor is line powered and can switch line voltage. ...

IDEM's HLM and HLM-SS range of Safety Limit Switches have been designed to be mounted For position sensing of moving applications e.g. guard doors, conveyors, machine beds and elevators. They are available with linear plungers, rotary levers, roller plungers, spring levers or telescopic spring levers with either slow break or snap action contacts. Heavy duty Die-Cast or Stainless Steel 316 bodies. Industry standard mounting to EN50041. Positive opening NC safety contact to EN60947-5-1. Large choice of actuator heads available. High mechanical life over 5,000,000 cycles. HLM: Die-Cast. ...

Sensor module and lens assembly - high impact, injection-molded plastic, Mounts directly to fixture or j-box via (2) 1.25" (31.75mm) stainless steel screws and locking nuts, Low voltage 24VDC, Downward looking daylight sensors, Lens sold separately - low or high mount, indoor/outdoor, Operating temperature:-40° to 149°F (-40° to 65°C), Applications include gymnasiums, cold storage, garages, parking lots, manufacturing floors, site/area, warehouses

Bircher Reglomat CESM-21CB-2430 Safety Switch Mat 24" x 30" Black Durable and reliable pressure- sensitive safety switch mats, ramp trim kits (sold separately) and safety controllers (sold separately) from Bircher Reglomat. For protection of people around machinery, robots and other hazardous areas. When a person, forklift, or other vehicle activates the mat, it sends a signal to the controller to stop the machine. May also be used as a signal mat for activation of a device or counter through presence detection. Features: Molded, totally sealed design is water resistant NEMA 4 (IP67) ...

Intended Use: EXTENDED RANGE 360° SENSOR; Passive Infrared (PIR) Sensor Features: PIR Occupancy Detection, 360° Coverage, Push-Button Programmable, Adjustable Time Delay, 100 Hr Lamp Burn-in Timer, Green LED Indicator Listings: UL and CUL Listed Construction: Auto set-point calibration, Two selectable modes of operation, On/Off mode: Photocell has full control during periods of occupancy Optics: 360° Coverage Electrical: The sensor detects changes in the infrared energy given off by occupants as they move within the field-of-view. Installation: Mount to ceiling, adjust to ...